Search results for query: *

I currently have an identical setup to Tekgirl23, and we have not been able to find a solution yet. atchuvely101, did this solution also fix the RTD issues? Did you have the same issues, as the problem that we are having seems to be related to something on the server itself, either a policy...

NTVQ80 DCHIP kit for Succession Media Card 32-port trunk card which includes the following; – NTWE07AA C7LIU D-Channel PC Card – NTMF29BA DCHIP to SDI card assembly cable – NTWE04AD Inter Cabinet cable (1 ft) – Support Bracket Retaining Cable and screws Also, if you goto a Signaling Server on...

When you upgrade the PBX, you will need to have new patches put into the PBX for Symposium. Also, the Symposium may have some pep's that are required, but you don't need to upgrade the Symposium software version for the PBX upgrade.

Upgrade the PBX to 4.0 first. Following that, as long as you have the space available in the PBX, I'd suggest installing the CP along side the MM to start. You can get it up and functioning prior to the migration, allowing you time to test it and "burn in" the system prior to shifting the...

This is the answer we have come up with so far. The Symposium Web Client instance of ADAM was set up to use nt authority\network service…We changed it to run as system and everything works fine. We had blown out the server and reinstalled it clean, rather then using an image. As they...

Where are you trying to connect to vxworks? This is normally a loading portion of the system, not something you would connect into via telnet or ethernet. There are differing versions based on the device from the PBX to ITG\VGMC's. What is the use of the IP address you are trying to get...

Is it a CS1000E, CS1000M, CS1000S? And I am assuming you are trying to connect to the Call Server, not a Signaling Server. For a Signaling Server, you would need to connect a RAS session to your network, and then start a Internet Browser session with the Signaling Server. For a normal TTY...

Also, if you have MMail in an Option 11, TTY 8 will be disabled until you do an AX session to the MMail, which if you then look from another TTY will show it enabled. What type of switch is it, and how are the TTY's built, if they are not PTY's.

Symposium has a backup program as part of the application. To backup the database information you need to use it, versus a 3rd party application. The blue database, among a few other things, will not be backed up if you attempt to do a full backup of the server using a third party backup...

What switch is this? Typically on Nortel PBX's you will always have a TTY port that can be hooked up to a modem for remote access.

You can change the DCFW setting on the phantom set if you dial in as well, just go into ld 20, do an easy change on the 500 set and change the DCFW.

Disable the elan(may have to disable the elnk in 137 first to disable it) if not already disabled. Go into ld 17, out the vas and elan associated with the application. Rebuild the elan and vas. Enable the ELAN and it should populate with the CallPilot IP address(given that you re-ran the...

Nortel says to Install Patch MPLR17694.

Nortel's suggested fix is to Install Patch MPLR17694.

Just a note, you can actually use a newer OS then 95 to format a PCMCIA card for an Option 11. The problem is that all newer OS's use FAT32 by default for formating. Do not allow the cardpro program to do the formating of the card, use Windows Explorer and select FAT for the file format. This...

I was wondering if you came up with any resolution on this problem? I have ran into the same thing, and have been working with Nortel on trying to resolve it. We have it installed on a Win2003 server using ADAM instead of Active Directory which was used on Win2000. Currently Nortel is looking...

I was wondering if you came up with any resolution on this problem? I have ran into the same thing, and have been working with Nortel on trying to resolve it. We have it installed on a Win2003 server using ADAM instead of Active Directory which was used on Win2000. Currently Nortel is looking...