Search results for query: *

I have a Merlin Messenger R3, Hardware Vintage 57, Application Vintage 33, Firmware Vintage 30, In a Magix system that is running slow. It takes about 15 seconds to get into the mail system and about 20 seconds to get to the mail box to get your messages. I’ve Reset the card and cold booted the...

And this is the error log: http://maund.com/error_log.htmhttp://maund.com/error_log.htm

First I would like to thank everyone for all your help. allisand, I’m still looking into the timing thing. I’m kind of new at this stuff. tdaugirdas, This is a new condition, the static on incoming and outgoing just started and any device that connects through a modem looses connection within...

tdaugirdas, Yes it is a T1 PRI, 5ESS, using Custom protocol Thanks for your reply

I'm getting 77 COMMAND BUFFER FULL and INVALID SANITY RESPONSE errors a day even after replacing the T1 card. Also getting static on all incoming calls. The phone company came out and tested the line and is blaming my equipment. Changing the 100CSU-DSU showed no improvements. Any help would...

Is there software like Reporter for Legend that will work on Magix to see what is hosing up the system? If so is there a free download?

I have a second Operator in Service department with a 4424 LD+. I need to set it up so when they put a call on hold it will start beeping at 20 seconds and ring back in 40 seconds. Or is that even possible? Many thanks in advance.

Any help at all would be deeply appreciated. If someone could just point me in the right direction. Thanks

How do I use WinSPM to setup a button on the operators phone to ring another extension at the same time for a night bell?

Thanks Tom, A;m I reading this report wrong? It looks like extension 5555 has forwarding on. EXTENSION DIRECTORY Port Ext # Label F H R M V R A 2 Addr A B C I S S R B C I F C I T S D E S W D G R R T 7/ 2 312 KIM----...

EXTENSION INFORMATION Extn SS/PP Type 5555 7/10 T/R CTI Link : No Alarms: ACTIVE Pool Access : Page Group : Primary Coverage : Secondary Coverage : Coverage Group : Call Screening : OFF Group...

Thanks MerlinMan, The extension rings with 2 short rings and then transfers to the operator. I have tried as you say *33 and the extension # and also tried *34* on the operators phone. And still have the same problem.

Thanks Tom, I have checked all the buttons in WinSPM. 1 = SysAcc Ring -I 2 = SysAcc Ring -I 3 = SysAcc-00 All other 32 buttons are Blank. Maybe i'm missing somthing. Thanks for the reply.

Call forwarding is stuck on an extension. I have tried all the codes from both ends, changed the extension number. Copied from one extension to the other and restarted the system. In the extension dir. report it still shows yes under R C F W. How can I get this turned off? Thanks for any help.

Thanks for all the help. All fo you have been a great help.

Is there somewhere I can input the serial number or hardware vintage to get the manufacture date? Or maybe a serial number breakdown chart?