Search results for query: *

thanks anytime

force feed a piece of paper thru there. Usually someone removes a jam by pulling the paper back the way it came into the printer and the thickness sensor tears a small piece of paper off and it gets stuck. open door A and feed the paper up the side and use the rollers to help it along it should...

if you check out fixyourownprinter.com you can find a clutch

you can call Xerox back and ask them i do not know of any other way.

thanks Marty for answering that.

its inside the printer. a very easy replacement if you can get one

create a two page document with the first page being the cover page.

the power supply is bad. I have seen this about 50 times.

Yeah i have a flag for you goto fixyourownprinter.com and search the forum for your user name.

call the Xerox support number and select software support and they should be able to help you with out any problems

i am not sure maybe marty knows. I have never removed it and watched during power up.

you will have to remove the drum heater, the sensor is behind it on the left. there might be a small piece of paper there or the sensor might be dislodged.

try holding the main drive in pleace and rotating it by hand to try and realign them.

Ebay maybe but Xerox makes sure everything gets shipped back to them so it might be hard to find used. I might be able to find the flag laying around. i will let you know tomorrow.

only black means the cleaning blade is not functioning correctly. The printer lays down in this order YMCK the cleaning blade is cleaning off the belt before it transfers check the blade assy.

you have to buy the whole assy. you are not going to want to do that as i can guess it will be costly but the part number is 351-1106-00 Upper feed assy, top half, with circuit bd, Phaser 850/860/8200

did you take some pictures so that we might be able to help someone else in with this error. If you did i can find a host for them just email them to me.

That sounds like the A/A4 sensor. It goes in the upper preheat entry guide assy. That is the metal rod you had to take out to get to the drum thermal preheater. if you take it back out and look on the right hand side there should be two flags that color. you might have broken one off.

What color is the flag and what is its shape?

as far as i know you can only get them from Xerox.