Search results for query: *

the codeset to send was set to 6.. i changed it to 0, but it didnt change anything. Here is what the Sysmonitor on IPO see's when the call comes in... The first part clearly displays the name properly "35767mS CD: CALL: 6.1.2 BState=Idle Cut=1 Music=0.0 Aend="Line 6" (250.10001)...

i the number part working, it was in change pub... now i'm greedy and would like to get the name as well.. the Definity side is definitely sending the name as it shows up in LIST TRACE TAC, but just getting the number on the IPO side

this is working now! thanks for your help. My last question is, how do i get the name to display too? on the IPO side i get the 4 digit extension, but not the name... maybe its not possible to do both

i thought it meant any call TO a 5 digit extension starting with 4... which is what im doing... 9012 in definity dials 8612 in IPO... line code is 4 so they dial 48612 so you're saying the entry needs to list 9, not 4

Here is how mine is setup EXT LEN 5 EXT CODE 4 (4 is what definity users dial to call over the IP TRUNK, followed by the 4 digit extension) CPN Prefix - I've tried populating this, currently its blank. CPN Len - 4 So for example, when someone calls me from the definity side, they dial...

the definity side is the outgoing side that isnt including the number.... i displayed the call handling for the IP trunk and it is blank, but it shouldnt matter since that's the outside right? on the IPO side (incoming) i dont have this option of course...

it let me add it, sorry.... it just still doesnt show the #'s in the list trace.. it shows " NO-CPNumber "

format in the trunk group is public, call type in aar analysis is "aar", public is not an option

here is the list trace TAC when the definity calls my IPO over an IP TRUNK. 2:56:23 dial 48612 route:UDP|AAR 12:56:23 term trunk-group 3 cid 0x39c5 12:56:23 dial 48612 route:UDP|AAR 12:56:23 route-pattern 10 preference 1 cid 0x39c5 12:56:23 seize trunk-group 3 member 2...

Here is the latest list trace TAC... list trace tac 35 Page 1 LIST TRACE time data 11:24:51 Calling party trunk-group 3 member 1 cid 0x3844 11:24:51 Calling Number & Name 8612 Shane...

in looking further, this seems to only apply to ISDN trunks not ip trunks. When i specify the IP trunk it doesnt seem to save... i'm out of ideas!

i'm there but i dont have the hell to put in.. i'll do some research it is totally blank, think thats the prob?

ok i checked on a few extensions, and they do have send per station CPN set to Y. I think i'll need a little more advice on the public-unknown piece.. thanks for yoru patience

I'm a little confused exactly what you wanted me to check.. is this all in the trunk group? I dont see per station cpn, i do see send calling number is set to Y. the "format" says private, is that where it should be public-unknown? sorry, i'm a lot familiar with the IPO

Here are the results of list trace TAC from the Definity side calling the IPO Side.. the name appears to be fine list trace tac 35 Page 1 LIST TRACE time data 09:39:26 dial 48612...

Still the same thing... inbound calls over the trunk show outside>

Everything was as you described, only Format was public instead of private. I changed it to Private, but can't test until tomorrow.. thanks!

I activated the voice networking box, didnt change anything. However i was only able to Merge changes since its during business hours. I will try bouncing it after hours and see if it has any effect thanks

Here's are my settings on the IPO side. G.711 ULAW 64K Enable Fast Start checked, nothing else I'm on 3.2(54). Phones are 2420's Thanks for the help!

if its not sending anything, how come the monitor on the IPO clearly shows the number and name of the person on the 8500 side? If the info is in the log on the IPO, it seems like it could be on the phone. So how do you get CLID working between the two? You have to go QSIG?