Search results for query: *

John gave me advice earlier on some alarm codes. In my investigation I checked the voltage readings on several cards and here is what i came up with. I have (3) QPC 82E 30 Conv(erter?) cards with a voltage reading of +8.4 and -24, I also have (3) QPC 82E 30 Conv cards with a voltage of +2.4...

I'm back with a question on my SL-1XT R17. I have two codes. the First is CED070 and the second is CED 200 1. I understand that the PBX is not switching at midnight. However what is involved in fixing this issue? Does it require powering down? This old beast has not been shut off for more...

you could also go to headsets.com and uses their online help to walk you through possible solutions. Jerry Bower Stategic Telecommunication

Okay John i programmed the key. However when i try to program a number it is not working. I leave the handset in the cradle push the Speed dial button and it flashes. i type in number one (first access code) and then the four digit extension to dial then i press the speed dial button again...

Okay John i programmed the key. However when i try to program a number it is not working. I leave the handset in the cradle push the Speed dial button and it flashes. i type in number one (first access code) and then the four digit extension to dial then i press the speed dial button again...

A user asked me to program a speed call button for him on a 2009. How do I go about doing that? How do i create a speed call code for him or find which is available? Jerry Bower Stategic Telecommunication

I have been cleaning out my frame. I came across a tn and looked it up in LD 20. Here is what it say tn 002 0 02 00 type ATT CDEN SD CUST 0 SETN 002 0 02 01 CDEN SD ANUM 01 DLEN 16 SSU 000 ICDR ICDD KEY 00 BVR 01 BIN 02 PRK 03 SSC 0000 04 ADL 75 05 06 07 MDT 08...

Back to the saga, I believe i managed to switch CPU to 0. however i am recieving the error message OVL 405. I have disk 2A, how do i restore it to the hard disk. as it stands i can not get into most of the loads i need to. Jerry Bower Stategic Telecommunication

John, does the command tcpu test only the active processor or both? If i attempt to do SCPU in LD 35 and that CPU is bad will the switch go down altogether or if the cpu is bad will it not allow me to switch over? Jerry Bower Stategic Telecommunication

John, No go on ld 135 same error code of ovl14. Any other ideas? Jerry Bower Stategic Telecommunication

John, when i try to do a LD 137 i recieve the following message:OVL14 is there another load i should be using in release 17? Jerry Bower Stategic Telecommunication

how important is this alarm. i have gone through my capture files for the past week and it appears everyday. the time stamp shows CPU 1 each day so i assume it is not switching over to the second CPU. so what course of action would you recommend? once again it is a SL1-xt on release 17. Yes...

there appears to be 8 cards. most of the cards are set to the following value EOD 13952 and ODT 4096 however one loop has timer for EOD set at 13824 and another card is set at EOD 3968 and ODT as 3840. What is normal and what adjustments would you make? Jerry Bower Stategic Telecommunication

LD 54 is not available in our switch. We get a ovl003. we are using release 17. after further investigation it seems to be one particular auto attendant. any suggerstions to resolve this issue. unfortunately this is the President of the college who is having this issue so i have to at least...

This is a sporadic issue. When individuals dial a number that has an automated attendant the attendant does not recognize the key inputs. Could this be an issue with a DTMF card in the switch. In the Nortel SL1-xt which cards are these and is there a way to test the channels on the cards...

How do i enable Line Mode? Please supply load directions. thanks Jerry Bower Stategic Telecommunication

I am seeing it right after i look up a tn in ld 20 ie 105 0 2 6 H Jerry Bower Stategic Telecommunication

What does the letter H represent or indicate following a TN? I am guessing that it is the first of two that are programmed with the same primary DN? Jerry Bower Stategic Telecommunication

My shelf went down in the switch right after that the entire switch went down for 10 minutes. I got the switch back up but i have an entire shelf down. what is the procedure to bring it back up? Loads and any other techincal help will be greatly appreciated. Jerry Bower Stategic...

No i have not built a route yet. what code do i need for a page route? Jerry Bower Stategic Telecommunication