Search results for query: *

I am having the same issue after lighting. My analog devices will not ring. I first replaced the cards, then the power supplies in main and exp cabinet,then the expansion cabinet, power cords, fiber cable, fiber receiver card and still no ringing. Everything else works fine. The expansion...

We actually originally had it set up to FWD no Answer and FWD on Busy to the next ATA in line, we were still having problems...

Thanks! We put it in a hunt group and it seems to be working. If I have anymore problems, I know where to go!

It rings the receptionists phone + the fax + the first ATA. We are not understading why, even with these DIDs set to private for the mentioned extensions, why when we call the DID of the first ATA, it rings to the receptionists desk and the fax machine. I have rebooted the phone system thinking...

Ok, this is a strange one. Recently, we installed a PRI on a Norstar MICS phone system. The customer has a call in system called MITC that their employees use to call in on. Instead of making the customer buy POTS lines for that, we install 4 ATA's on the PRI. We have those 4 ATA's going to...

I am not receiving any slips. I beleive I will go back on site and try a loopback plug and also double check my cable. Thank you

I have had a TBERD on site and we both are B8ZS. On the CSU I originaly set it for DSX-1, then moved it to Network. I was the same errors. The other 2 clock options are DTE which it definately does not like and Internal, this gave me frame slips. I have all 24 channels set to DSX-1 on this port...

ld 60 shows my clock locked to slot 2, pref -2, sref - free run, auto swref clk no errors

I have an Opt 11c RLS 18.30. We have a straight T-1 with 24 voice channels. I am getting clocking errors and we surpass our threshold and the system drops. I have replaced the T-1 card and clock controller and the same thing occurs. I had an Adtran T1 ESF CSU Ace connected for years and I...

Firebirdscrambler, Thank you very much, it worked. You folks are awesome. ATG Joe

John, Thank you for your help I am going to restate my question differently because I think I asked incorrectly my orginal question. I am adding more I2004 phones and I bought 25 more IP licenses from Nortel. I have 3 key codes to enter? Would this be load 117? I found the information in my book...

I need to add some IP addresses to my customers Option 11C, I beleive I add these in load 143, and then NEW but I am struggling from there. Can someone shed some light. thak you ATG Joe