Search results for query: *

I have a 61c.

All of the pagers have local numbers. I found out that one of the pagers I was testing with was not functioning. And once I eliminated that one I am able to notify all three. So once I changed "For Successful Notification mailbox login REQUIRED" all three numbers are notified. So it looks like...

In the individual mailbox record, under "remote Notification schedules". It is under "Business Days Schedule" right below the Period 1 info. I have tried both mailbox login required/not required and it seems to have no change.

ArchTelecom We are also on MM13. It sounds as if we need each others config. Do you have "For successful Notification mailbox login:" Required or Not Required? Also I have the device type set to numeric with call back& caller number. I thought I would work with the paging company as a last resort.

I need to setup a mailbox in MM that will notify three or more outside pager numbers. I tried configuring the three Target numbers in Remote Notification Schedules but it only notified the 1st number. I am assuming that Target 2 and 3 will only be tried if the 1st call fails to connect. By...

cls should be set to FR2

I am trying to set up an auto attendant that will give callers three options. #1 transfers to that extensions voicemail #2 transfers to a second persons extension. #3 transfers to a third persons extension. The problem is with #1. When I set the button to "transfer to voicemail" the caller...

I agree with Nortellian and Dtone. Nortel equipment is very stable but pricey. Another option for you may be the 3Com NBX. I have recently installed a 3Com NBX 100 in a remote office and tied it back into an option 61c. After eight months of trial the NBX seems to be a pretty good system for a...

try ld 81 req=lst feat=rnp you should be prompted for a rnpg at this point return through the rest.

I am on an option 61c so this may not be relevant. But I have had the same problem in the past with power hits. Our Meridian Mail would not update its time from the switch and would hang on bootup until you manually set the time and date. I saw that you referenced a error message "CSA001 9 time...