Does anyone know how to make an eeprom programmer, or where a person can get one? I was told that there are schematics out there on how to make your own, and it must be that "Mongo not smart" cause I cant seem to locate any. Thanks a bunch, don't ya know....
Sounds about par for "any" version of windows media player. I personally removed media player and I use Nero Media Player. Better quality and you can use it without it "talking" back and forth with any "big brothers" out there that might be interested in sticking thier nose in your business...
I want to thank all you guys for the input..turns out that the agp card was faulty. I just threw a bunch of old stuff from my "junk pile" just to see what would happen...I also saw where someone said that the heat sink could be 180 out of position..Here is how it went.
started only with...
thanks wolluf, it now hangs on the screen that says:"IRQ-not less-than-equal" ??? The manual states that the mobo starts at 66fsb. Do you think I should try with a pc100 stick of ram?
I was going through my junk closet and found an asus a7a266 mobo still in the box that I had totally forgotten about. It's got the amd 950 on it. I put it together with an agp graphics card (ati rage pro turbo) generic sound card, 10-100 lan, etc.. I know this board was setup from the...
Yup....memory module....try a pc100 sdram...I had the same problem with a new mobo setup...And as always...I read the instructions only after "killing" the bios chip. replaced chip read the setup instructions and that baby is still flyin around the room.. Thanks for letting me vent
Hey guys...I'm tryin to hook up a friend by fixin his broke machine. What's the "top end" of ram for the minimum 98 install??? I keep getting throught the driver install, then the machine hangs. It's a "dinky" little thing with only 2 sdr slots. I upped the ram to 2 256 sticks and the thing...
My 2 cents....I bought an I/O external 24x10x40 USB 2.0 at Comp USA for 49 bucks. It comes with the USB 2.0 driver disk for windows 98. Comes also with Nero software. I wish you luck..
You know..I had A similar query regarding an Asus mobo. You guys were rather helpful. Especially the tip to set the jumpers opposite of what the manual said. I have an Asus a7a266 with a amd 950 with 512 megs of ram. Same thing. start up, then die a few seconds into boot. I set everything...
Thanks for the response fellas...do I need to put a drive in that has all the drivers in it?? it will not recognize the a floppy or the hard drive just the cd, but it wont boot from that..
I just recently got an ASUS A7A266 motherboard with an Athlon 950 cpu attatched. I flashed the bios chip and started it with the minimum peripherals, ie: floppy, cd, formatted 1.2 gig hard drive and 1 stick of 64 meg sdr. I know about the heat issues that the 960 create so I installed a cpu...
I just got a pentium 3 processor and installed it in my p2 based machine. When booting up error message "167 no processor bios update found" appears and the system shuts down. The bios update for my ibm mother board I found doesnt seem to work. Please, does anyone have any suggestions? I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.