Hi Jad,
sys-unconfig justs deletes all the configuration and reboots the server with no configuration at all.Maybe i should check out the man page on that as well.For now i have one solaris up and running and am going to install redhat on another machine and evaluate that as well.In my opinion...
I have used the host name in the hostname.device file and then configured the hosts file with the appropriate ip.i have also tried to assign ip directly into the hostname .device file without the host name and rebooted and that does not work also.Only The combination of the commands i mentioned...
On one of the stations,ifconfig -a would show me the loopback address on both the loopback adapter and the elxl0,and on the other i would see the loopback and the dnet0(dlink)with ip 0.0.0.0.Anyway i have temporarily solved the problem.i used ifconfig to assign ip,then stopped and started the...
Hi guys,
It has been quite a while now that i have been struggling with ip configuration on solaris 8.0(intel).i have done 2 installations on 2 different intel boxes.I have configured all the necessary /etc files that include...
application vendors want netscape.We are going with that installation on a sun box.Thanks for the help.Still having problems with ip.Please check my other posts if you can.Thanks
Install the nic,and then during bootup press esc to get into the configuration tool screen.Then press f2 to scan hardware.It should detect your nic.Before exiting the program,it will ask you where to boot up from.If you see the nic card include with the cd and harddisk options,you are all...
I reinstalled the os with the 3com card this time.There is a elx0 file in /dev now.With the ifconfig -a i can also see the loopback int and the eth int.During the install,I could not configure networking for some reason.i have configured the necessary files in /etc,and have put the server up on...
sorry Jon,
No number there.Just elx.No other device for ethernet there either.By the way what is boot-r.How do i use it?I dont mind trying something one last time before reinstallation.
Tried everything still errors.during installation i was using an allied telesyn card which i configured with an ip
during installation.The system seemed to not detect it so i installed a 3com card and voila ,i saw it on the configuration tool and i thought problem over.in /dev there is a file...
Hi,
I was wondering if anyone could help me troubleshoot and configure ip,on a solaris 8.0 (intel version).The nic is a 3com card which was detected by the configuration tool but during bootup i see the message"no interfaces up".the ifconfig -a command shows only the loopback...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.