Search results for query: *

I've got it working in the UK over 64k kilostream links and in a lab environment. I've posted this info before: http://www.tek-tips.com/viewthread.cfm?SQID=732781&SPID=940&newpid=940&page=1

It's not exactly a download (and it's uk related, as the NA was developed in the UK) http://www.avaya.co.uk/Support/Technical_Database_(Network_Alchemy)/Software_Downloads/LatestCDs/Default.asp Avaya list version 2.2 as the latest, however: "Alchemy version 2.3 software will only be available...

1/ You can't. The IPO only issues it's own address as the gateway. 2/ Add in the routing table the following: IP Address: <leave blank> IP Mask: <leave blank> Gateway IP address: <ip address of the ne default gateway> Destination: LAN1 Metric: <leave blank> ProxyARP: <leave unchecked> The IPO...

I'm in the UK and don't have any problems dialing internation. What number are you trying to dial? Mine is: +44 (0) 1482 387xxx, so in the UK you would dial 01482 387xxx and from the US (assuming internation dialing code is 00): 00441482387xxx - some uk numbers have area codes of 02 as well as...

I change short code: ?/./0/Dial/<blank> to ?/.S501001/0/Dial/<blank> where 501001 is the main published number (i.e. so the extensions do not present out their number). Reading the manual, it does say that if the short code of: 9N/*67N/0/Dial/<blank> will block caller ID. This won't work in the...

Here’s a brief note to get the IPO and Cisco gear working together. I’ve got it working successfully on X.21 Kilostream in the UK and in a lab environment using a DCE cable and the Cisco providing the clock information. Plug the WAN cable into the IP Office and reboot, so the unit detects the...

It is just the handsets rebooting (power issue to the DT modules) or is the entire Phone System rebooting (possibly a config issue). I've had an LDAP problem which caused the handsets to loose group functionality and stopped the ability to download the config file - I disabled LDAP and all...

I've got WAN link working to a Cisco that's running over an X.21 connection (Kilostream in the UK) using PPP. I've not had the opportunity to use Frame yet, but i'll post the configs if you'd like.

Ah yes - that's right. The DT5/2050 have the lights on the DSS keys. It was the DT1's I was tinking about.

There was a problem with earlier firmware versions - i think it was resolved in 1.4(37)? However, I have known people still have problems with other analogue phones.

DT5's work okay (they are the same as DT2030's) - The DT3's don't have the display on them, so you'll have to use shortcodes to acces the features - but this shouldn't be a problem.