Search results for query: *

Looking for some documetation on configuring a Summit switch for IP phones.

Anyone have any documentation on setting up Extreme Summit switches to work with IP phones using IP Phones all locally.

must pay for upgrades except for .x upgrades. FYI - you get 5 free softphones out of the box on every CM install since R11 (CM1)

Reboot the remote system and the main system with a minute in between. check your VoIP Lines and make sure Voice Networking is set to yes assuming this is an SCN. can you ping from side to side? do you have any errors in Manager?

If a second message is left within 15 seconds of the first, the second one will not alert, copy or forward the message to email. of course it is in the mailbox. 412 with 3.069 and Exchange 2003 using SMTP for email push from VMPro. this is the case for all users. have done reboots also...

Do you have a prefix number coming inbound? that might do it.

Who knows exactly what and why we change the diff serv settings under the Gatekeeper. I had some VoIP issues with a SCN over a LAN and Avaya had me change the signalling to 34. just wondering has a document that explains in detail when to use differnet settings for the QoS.

thansk also Tom. the tech alraedy left. when i get in front of it ill let you know. thats what i was wondering though, wether or not a card could do a forced upgrade. ive only done upgrades manually. im guessing it was an old card and it killed the boards.

i have no idea right now. i had a guy doing it remote across the country. Thanks Jack.

what happens when you bring a Mgix up with a Orange card that is old? i had a working PBX and since someone stuck a flash card in and rebooted now the the 412 and 024 are gone. did a board renumber and actually defaulted it with no luck but yet the boards still dont show up. just FF what...

You can get a new one from your vendor by doing a swap. hell just need the serial number and he can get an advanced replacment.

Anyone know when Verizon will get the pearl?

Not that i can think of.

anyone know how to get a paging tone (that is played to person who is iniating page) to come back for DialPaging internally? upgraded to 3.1.65 and noticed its gone.

i get an error when trying to add service pack 7 for Exchange 3.6 it says to login as the the blackberry account locally. i am logged in as that account and i dont have an option like most PC's for a local machine login. im running SBS2003. can anyone help me? thanks.

What firmware is on the board? by any chance are you replacing an older TN799 that was in that slot?

have you upgraded the IP Phones? i had the same problem and it didnt matter wich codec or DTMF setting was used. upgrading the firmware on the phones fixed it for me. this was pre 3.2 so maybe that will fix it too.

Is it possible to save speed dials on IP phones? were going to switch a bunch of phones from static to DHCP and was wondering if there was a way to keep all the memory. i can do this on the ECG CM Phones using a FTP server.

does anyone know if an 8500 will support magix's connected via P2P T1with mode-code to a MAP5. currently have an si R11 with 8 magix and am thinking of migrating it.

some of you touched on it with the power supplies but ill take a little further... make a v3 module line that has the following: power supply that slides in from the back ATM4 and PRI cards that slide in from the back and use VCM and Modem cards that slide in too how hard would this really...