Search results for query: *

Hi MDUserSergey, the last two things to try are the SFCEI and RFEXI commands: SFCEI; From ALEX: "Start of the entire system in phase 1.3 and 1.5. All program units in all LIMs receive the start signal for start phase 1.3 and start phase 1.5. In start phase 1.3 all program units are able to...

Hi MDUserSergey, last chance..... as I said above, try to restart ELP6 and KLP1M program unit in LIM 1 (ONE), not in LIM 7 (SEVEN) RFPUI:UNIT=ELP6,LIM=1; RFPUI:UNIT=KLP1M,LIM=1;

ok, try to restart ELP6 and KLP1M program unit in LIM 1: RFPUI:UNIT=ELP6,LIM=1; RFPUI:UNIT=KLP1M,LIM=1; then try again KSMDP:MDN=5730; if it still doesn't work, try this: BLEQI:EQU=7-1-50-26; RFBOI:BPOS=7-1-50; BLEQE:EQU=7-1-50-26,ALLFM=YES; and then KSMDP:MDN=5730; I don't work anymore on...

Try to restart KLP1M program unit also...... From ALEX: KLP1M Administers a specific line pick-up number (MDN) which has multiple representation via own (ODN) or additional (ADN) directory number for some other telephone.

As bpetya say: KSMDP:MDN=5730; then you will see which extensions have MDNs that need to be deleted KSMDE:DIR=xxxx,MDN=5730; If you delete all of them, EXTEE will work after that (I hope!!!)

Hi, if you are returned "command lost" surely there is a problem with some program unit or a data corruption. Try to restart program unit ELP6: RFPUI:UNIT=ELP6,LIM=1; I hope it can help you....

Hi Michele, have you tried to restart ELP6 progran unit in LIM 11 and LIM 1 ?

in my experience the only way is to change / move the card with another working ....... is the only way (that i know) to release the extension number from busy.

hi alisaifee 76 extension 575 appears to be an ADN on key 14 of the ext. 505 to delete it try KSANE:ADN=575; bye.

ciao Michele, try this: KSFKC:DIR=3790,KEY=01,FCN=MNS,DIG=3778;

Hi, try to delete the ip address of the sw server in network configuration of the ip-phone. Max.

From ALEX: 180 m if using a 75 ohm coax. cable without repeater. 260 m if using a 120 ohm twisted pair cable without repeater.

is the phone number where calls are diverted for: direct diversion message diversion diversion on busy diversion on no answer the facility is initiated by command CDINI.

from the handset 7967, try pressing the button where the ADN is cofigured and dial *2*1600#

Try with *21*1556*1600# or, push the soft-key of the ADN 1556 on ODN 7967 and dial *21*1600#

Hi summerdike, search the web with your favorite search engine.

Hi dugdstew1, you've already tried to restart the niu board in BPOS 1-0-60?

I had the same problem in the past, due to a software corruption. First of all try to reload the whole system by lim 1.

Hi jaylek, for the external follow me, you have to change the bit D1 in CDIV by 0 to 1: old CDIV 00912213 new CDIV 10912213 The procedure is initiated thru phone by dialling the code *22#external destination code+external number# To deactivate external follow me: #22# I hope to have been...

Hi jaylek, your CDIV for CSP=1 is 00112213. The value of bit D2 D3 must be changed. Try with 00912213.