Search results for query: *

Yes I had gone through it. They say that for Auto qos the Cisco IOS Software Release 12.2(15)T and later supports & our is 12.3 but still no such command exits. R1(config-if)#int s3 R1(config-if)# R1(config-if)#auto qos voip ^ % Invalid input detected at '^' marker...

Hi, I want's to enable AutoQos for Voip on Cisco3745 serial interface, but the command "auto qos voip" is not available. I tried using ? on the interface mode.But no such command exists. What is the IOS ver required to support AutoQos? sh ver output Cisco Internetwork Operating...

Configure rip version 2 and no auto-summary on 2650main and remove the static routes from both router if possible.Since you are running rip static routes not required Are you able to ping the serial and Ethernet IP's of 2650branch from the 2650main and vice versa ?If this works then check the...

Hi lui In my first post I didn't mention that I already configured one multilink between R1 and R2 with 3*64Kbps.So it was the multilink bundle name which was getting conflict since the hostname is taken as the bundle name by default. Previously I had configured 5*64Kbps MPPP but since 2 of...

I think,I had got the solution. Will try and get back to u Thanks

We had R1(cisco 3745) & R2(cisco 1721) routers with 2 64kbps Leased line between them. On R1 this links are terminated as 2 diff 64 speed timeslots on Channeslised E1. On R2 these are physically seperate links with RAD modems. This 2 links works fine when configured individually. But when this...

We had R1(cisco 3745) & R2(cisco 1721) routers with 2 64kbps Leased line between them. On R1 this links are terminated as 2 diff 64 speed timeslots on Channeslised E1. On R2 these are physically seperate links with RAD modems. This 2 links works fine when configured individually. But when this...