How to AutoQos

[Maxan]

Hi,

I want's to enable AutoQos for Voip on Cisco3745 serial interface, but the command "auto qos voip" is not available.
I tried using ? on the interface mode.But no such command exists.

What is the IOS ver required to support AutoQos?

sh ver output

Cisco Internetwork Operating System Software
IOS (tm) 3700 Software (C3745-I-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 19-Aug-03 08:24 by dchih
Image text-base: 0x60008954, data-base: 0x60D56000

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

Router uptime is 1 day, 4 hours, 7 minutes
System returned to ROM by power-on
System restarted at 14:31:49 UTC Sat Feb 7 2004
System image file is "flash:c3745-i-mz.123-3.bin"

 

[routerman]

Have you looked at the AutoQoS home page at:

http://www.cisco.com/en/US/tech/tk543/tk759/tk879/tech_protocol_home.html

 

[Maxan]

Yes I had gone through it. They say that for Auto qos the Cisco IOS Software Release 12.2(15)T and later supports & our is 12.3 but still no such command exits.

R1(config-if)#int s3
R1(config-if)#
R1(config-if)#auto qos voip
^
% Invalid input detected at '^' marker.

R1(config-if)#?
Interface configuration commands:
access-expression Build a bridge boolean access expression
arp Set arp type (arpa, probe, snap) or timeout
autodetect Autodetect Encapsulations on Serial interface
backup Modify backup parameters
bandwidth Set bandwidth informational parameter
bgp-policy Apply policy propogated by bgp community string
bridge-group Transparent bridging interface parameters
carrier-delay Specify delay for interface transitions
cdp CDP interface subcommands
clock Configure serial interface clock
compress Set serial interface for compression
custom-queue-list Assign a custom queue list to an interface
dampening Enable event dampening
default Set a command to its defaults
delay Specify interface throughput delay
description Interface specific description
down-when-looped Force looped serial interface down
dxi ATM-DXI configuration commands
encapsulation Set encapsulation type for an interface
exit Exit from interface configuration mode
fair-queue Enable Fair Queuing on an Interface
--More--