Search results for query: *

Hello, I`d looking for recommendation based on experience. I have a cottage in a valley where we have no Cellular coverage. So I decided to built a WiFi network on my 2 acres property. There is a business at about less than 1 km away from my house which has very good network connectivity...

Ok got it for RDP for a single user, it is working. But how to have multiple RDP sessions with the same user but not the same screen/window ? Is it Terminal Server Role then? Thanks, Sylvain

Hello SME, I have a Web Server Windows Server 2008 R2 and would like to add a role of RDP server. Is it possible? I know from the Server Manager Wizard, it doesn't offer the option. The only role I could add is DNS. Is there a way via command line? Keep in mind this server is not for...

oupsss Win 7

Hello, I am looking for advice on what would be the best solution to connect my new Bluetooth Headset to my laptop. I have connected successfully the Headset but when talking on any VOIP we could hear static on the voice. If I just use the laptop speakers and micro there is no static, so I...

Hello Guru, I am trying to boot a server T5220 from a Network File Server. Everything looks ok, but I still see an issue, not sure if it reads the network-boot-arguments correctly? NFS: \\192.168.0.122\repository\V8SOLUTION_MIXED_rev1\BOOT_MEDIA_SUN4V File Name: BOOT_MEDIA_SUN4V.W08_4V.iso...

AVAILABLE DISK SELECTIONS: 0. c1t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 32 sec 279> /pci@0/pci@0/pci@2/scsi@0/sd@0,0 1. c1t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 32 sec 279> /pci@0/pci@0/pci@2/scsi@0/sd@2,0 Specify disk (enter its number): 0 It`s up to: Verifying...

I've installed Solaris 10 after the Format completed and it worked. but when I tried to install my application it failed... I am assuming because of requirement not met in space, so I'm thinking to remove the RAID and get my 4x 300GB of HD. Preparing system for Solaris install Configuring...

# raidctl Controller: 1 Volume:c1t0d0 Volume:c1t2d0 Disk: 0.0.0 Disk: 0.1.0 Disk: 0.2.0 Disk: 0.3.0 # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size Level...

Hi Chris, I am not sure if I will split them.. The raid provide some benefit too.. and I just seen the Pass 0 finished, now pass 1 just started so I am good for another 33 hours total for each pair... :) Formatting... Mode sense page(4) reports rpm value as 0, adjusting it to 3600 done...

I guess it will run up to 65533 Yes they are SUN HD I have 4 physically inserted into the server, so they are probably in pair, but they really show 300 MB on them. # format -e Searching for disks...done c1t0d0: configured with capacity of 278.99GB c1t2d0: configured with capacity of 278.99GB...

How long should take format & Verify? I am running this command below since 21 hours and it is still running... It's a T5220 e/w 4 x 300 GB HD. I want to install Solaris 10. format> format Mode sense page(4) reports rpm value as 0, adjusting it to 3600 Ready to format. Formatting cannot be...

How long should take format & Verify? I am running this command below since 21 hours and it is still running... It's a T5220 e/w 4 x 300 GB HD. I want to install Solaris 10. format> format Mode sense page(4) reports rpm value as 0, adjusting it to 3600 Ready to format. Formatting cannot be...

I got it working, but ending up with this message Press the return key for an interactive Solaris install... - Warning ---------------------------------------------------------------------- One or more disks are found, but one of the following problems exists: >...

Thanks cndcadams ! I did, but how to setup an IP to a T5220 which cannot boot, I am at OK prompt and the only thing I can do is boot with options... I got up to a point where it is just requesting an IP from DHCP, but my router is not providing an IP, so I gues I need to setup something in the...

I need to install SW which has Solaris in the boot media on a t5220 which I have only the ok prompt. I have on the same network a t5120 this server has a DVD-rom. Reading about jumpstart, it seems like I need to get the MAC address of the t5220, but I have access only to ok prompt . I could try...

Thanks autoexpect works perfectly for learning. I've created my script and it work fine. Now I want to improve it by adding variables and get the variable from a text file. So far this part was really easy with autoexpect: send -- "telnet 135.121.239.90\r" expect -exact "telnet...

Hi exsnafu! nope I just tried and these devices are not ssh capable, only my main server..

Hello, First of all I want to say I'm starting to write these kind of script, so really newbie level. I'm trying to create a script which will telnet into many different boxes (linux & Unix based)and from these device telnet into a sub-component, then run a simple command capturing partially the...

Hi, How could I make a script that would telnet to a device, once in this devise would telnet into a device connected to this device with login & password, then run a couple command like cpmDumpStatus, collect this data and paste it into a text file.. Once done it will exit and pop a question...