Search results for query: *

Thank you AvayaTier3. This worked great. I looked everywhere to find this. The old guys like the terminal in the com room.

Hi lopes, I like having a terminal that is always ready to go and turned on.

Hi all, I have a 9.0 definity. My old SAT went and replaced with new. I however don't remember how to setup the F1 thru F8 keys. I know they have to be remapped but I don't know the SAT codes to assign? Could some one send me a list of SAT commands for the F keys? Thanks you

Hi all, I have an IPO 500v1 8.0 43. The original feature does not have any license features. I purchased a feature card with license features. How do I go about upgrading the new feature key card? Thanks in advance.

I did try this, but still doesn't work. When I manually dial the digits, it works. When the digits are dial automaticly or last number redialed, the call won't go through. I have a digit grabber verifying the digits sent.

Hi intrigant, I did try 3 commas, but still the same result. I have this set up on the user short code. Code 000XXX Telephone 268,,,N Feature Dial extn <-----also changed this to Dial Line Group 0 Could the short code be interfereing with dialing Code 268N Telephone N Feature Dial Line Group 9

Hi All, I have another question. I would like to have this Harris caller Id test to call back across a pri. The access number to the pri is 268. It does send all digits, but it needs a 1 or 2 second delay between 268 and XXXX. I tried to set this up several different ways but never works...

Hi Intrigant, I did get this to work. Thank you I had to add another X to code. 000XXXX

I did try this and still get the same thing. I put short code in the extension. Code 000XXX Telephone N Feature Dial exn Line Group 0

Hi All, I have a Harris Caller ID test unit connected to an analog port. The problem is, the test unit is dialing out 7 digits. The first 3 digits is always 000 and then the extension. Is there a way to delete the first 3 digits 000 and to just dial the last 4 digits in a short code?

HI all, Does anyone know of a place that sells power supplies for the IP 500 v1?

I tried the same setup with a slc 2000 remote terminal and couldn't get it to work.

I had a CMC go bad with a Tn2402 processor card and Avaya replaced the CMC with a G600. Its worked great and never had any problems. I thought maybe the G650 would get me a couple of extra card slots. Thanks you for the info.

Is it possible a TN2402&TN2182C work properly on a G650?

Does anyone have documents on slc 2000 BYB2 card setup? Thanks in advance

Does anyone have TN735 cards they want to sell or get rid of. Thanks Ryan

My PC also points to my router 192.168.0.1, I just have a simple setup.

I don't have a DNS server. In the 46xxsettins, the DNS setting 192.168.0.1 is my router.

Here is a copy of my 46xx setting ############################################################ ## ## ## AVAYA IP TELEPHONE CONFIGURATION FILE TEMPLATE ## ## For IP Office ## ##...

No I don't use a proxy, Its just a simple setup from wan port on IP500 to a router.