Search results for query: *

I am trying to set up a cisco 1603 with ios version 11.3 for connecting internet network to internet the config file is like this: but router is not dialing to inter net even if everything appears to be fine. please help akonwar ___________________________________ version 11.3 service timestamps...

cannot see the information link it requires user authentication

I am trying to fix a router remotely. I want to see the debug messsages on the remote router. say e.g #debug ppp on My problem is that no error or debug output comes on my telnet terminal. However, the on console the output comes properly.I am accesing the remoter router like telnet <ipaddressof...

I think you ll have to use NAT with static ip address but the exact syntax i am not sure off. Can any one help??

Other end Remote router config is as follows: interface FastEthernet0/0 ip address 10.78.32.1 255.255.255.0 no ip mroute-cache speed auto full-duplex ! interface Serial1/0 bandwidth 64 no ip address encapsulation ppp keepalive 60 ----------------------- sh int s0/0 is Serial1/0 is...

Thanks allfor your great response. This setup is never operational yet. sorta experimental. how to i know whether my router is dce mode or dte mode?? also how to know which encapsulation is the best for my system. actually the physical system is like this myrouter-ss-v.35---nokia mux...

Hello, I have got a cisco 2611 router with the with serial interface connected to a serial communication system for commu. with another router . However on giving the command sh int s0/1 at my end the following output comes and no data transfer takes place. Serial0/1 is up, line protocol is...

I want to install a x.400 connector in for connecting my site to another site. However, I am not able to install the tcp/ip mta transport stack as no such option exists under ms exhange administrator | file | new other | new mta transport stack. Only ras mta transport stack is visible under it...

Can any one tell me how to turn off my tftp options in my cisco 1751v

My router a cisco 1751v is fully configured and working fine. But the problem is it always tries to access tftp server in background. I get following errors in my tftp server log. my router name is mourigram_ppl_term The errors in tftp log are file not found ...mourigra.cfg file not found...

Will the above setup allow dns querys from the proxy to internet. Is that required for able to see internet from clients. My internet router knows about dns. It also takes care of nat etc.

I have a cisco 1751 v router 10.77.37.1 connected to my internal network. I have a internet gateway router as 10.77.37.10 also connected to the same lan. The internet router is a coyote linux dial on demand box which allows everything to go out including udp broadcasts. My problem is i want to...

Can any one tell me what a dynamic access list is? What are its applications?

Thanks for the links.

Can access lists can block / permit packets based on time of the day say to permit internet traffic only between 9:00 am to 5:00 pm. what is the syntax in that case for access-list command? Router is cisco 1751.

I am attaching my config as suggested by our main office administrator. version 12.2 service config service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname mourigram_ppl_term !! memory-size iomem 15 ip subnet-zero ! ! no ip domain lookup ! isdn...

Its connected through iDU to a switch connected to my router like this vsat----idu-------ethernet switch-----router

I have a router 1751 with 1 serial and 1 bri port. I also have a vsat connection (a gateway switch with ip)to my remote office. I want a setup like this whenever my leased line / serial is down automatically switch over to vsat when its up go back to lease line. if both serial and vsat are...

Can any body tell me how to connect two exchange sites A and B under the same organisation=C using MS-Mail connector / Lotus mail connector / siteconnector The network configuration of the two sites is as follows: Site A ---------WAN link---------- Site B PDC PDC dcphm1...

How do I setup my cisco 1751 router to lookup to a dns server.