outside IP to internal IP

[s58smith]

I have a cisco 804 setup with IOS 12.0.

I'm wanting to have all traffic from single internet IP address always route to a certain internal IP address. Example:
Router external IP is 67.29.204.111
Internal IP of PC 192.168.0.3
Always have Internet IP 94.63.237.243 route to 192.168.0.3

I know how to setup port forwarding, but this is different. In this case I want any incoming traffic from the Internet IP 94.63.237.243 to be sent to my ineternal PC at 192.168.0.3.

 

[akonwar]

I think you ll have to use NAT with static ip address but the exact syntax i am not sure off. Can any one help??

 

[bierhunter]

I'm not real familiar with the 804, but does it have a DMZ option? If it does, you should be able to put the private IP there and all traffic originating from the outside will go there. At least that's

With Cisco IOS CLI I would use:

ip nat inside source static 192.168.0.3 67.29.204.111

Of course, don't forget that the host will be wide open to the world without other security in place.