Search results for query: *

*52 will clear a call. It may be necessary to clear a connected call, for example after attempting a transfer and hearing voicemail or ringing. To do this dial ** for dial tone and then *52. ## will return to dial tone after getting busy, number unobtainable or short code confirmation tones from...

kwing112000 is correct, after you dial ** to get system dialtone you can also dial 9 and an external number. *52 will clear a call. It may be necessary to clear a connected call, for example after attempting a transfer and hearing voicemail or ringing. To do this dial ** for dial tone and then...

If you reserve a last appearance CA under User/Telephony/Multi-line Options, you will always be able to transfer a call.

Go to SIP/VoIP/Fax Transport Support and you can set G711 for fax.

Give it a Login Code password 1234, User/Telephony/Supervisor Settings and then hotdesk in on that extension *35*2087*1234# sometimes analogue need to hotdesk in to their extensions when no user shows up.

IPO 500V2 Rel 8.0.61. I've had the MWI from Bell Call Answer causing phantom ringing on the analog lines as per thread940-1709703. I was on 8.0.61 and downgraded to 8.0.44. This has now stopped incoming caller display. Does anyone know which 8.0.xx will fix the two issues?

Look at the User Guides for the T & M series phones & you find around page 7 the button mapping for these phones. Stick with buttons for park, voicemail, conference & transfer.

Create a S/C & make sure you enter in Feature: Dial Direct. Code: *77 Feature: Dial Direct Tel.#: 915555551234Y,1234 To call forward to this number in Manager User, Forwarding - Use the short code.

You just have to open a WinSCP session as outlined by intrigrant above with 2 panes, one on your PC & the other one on the UC, highlight all your WAV files, drag & drop them into the VMPRO WAV file.

In the system programming, I go to -> Terminals & Sets -> Sets -> Ext # -> Copy: System Data -> Copy: single -> copy to new Ext #?" When you get to System Data press CHANGE to show SYSTEM+USER & continue to -> Copy: single -> copy to new Ext #?

Have a great Christmas & a New Year to all!!!

If you are using the US locale locate your VMPRO folder VM/WAVS/enu & rename prompt 43 to 43OLD & you will get rid of the Avaya prompt.

In Manager, go to Directory,enter a speed dial location in "Index" from 000-999, enter the name of the company & then enter the number 9-xxx-xxx-xxxx. To dial from your phone, programme a speed dial button or press Feature 0 & the speed dial location. Personal speed dial locations start at 00-99.

If your device or application does not support SSL and you are need an SMTP for gmail to connect use aspmx.l.google.com on port 25. (that is the letter l between aspmx. and .google) Give this a try.

If you are are using gmail then use aspmx.l.google.com on port 25. If your device or application does not support SSL, connect to aspmx.l.google.com on port 25. Give this a try.

If you have VMPRO then do the following, you can allow all the users access to it in VMPRO in the "Get Mail" action. Open the action & in the "Specific" tab check the "Provide Advanced Personal Options." When you call into VMPRO & remote login to your mail box, press 5 & when you hear the...

HSM is right do the following, you can allow all the users access to it in VMPRO in the "Get Mail" action. Open the action & in the "Specific" tab check the "Provide Advanced Personal Options." When you call into VMPRO & remote login to your mail box, press 5 & when you hear the prompts press 9...

Try these Short Codes: To park the call. Code: *101 Feature: Park Call Telephone number: 101 Line Group ID: 0 To unpark the call. Code: 101 Feature: UnPark Call Telephone number: 101 Line Group ID: 0 Under button programming. Label: Park 1 Action: Call Park Action Data: 101 If you don't...

You should enter the semi-colon in the code and 1N for the telephone number in the restricted ARS table. Code: 1N; Telephone number: 1N Feature: Barred Line Group ID: 0 Don't forget if you want to allow 1-800 numbers you have to enter them individually. Code: 1800xxxxxxx Telephone number...

Kwing is right, however you can allow all the users access to it in VMPRO in the "Get Mail" action. Open the action & in the "Specific" tab check the "Provide Advanced Personal Options." When you call into VMPRO & remote login to your mail box, press 5 & when you hear the prompts press 9, this...