Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
No link between Nortel and Cisco 100baseT
Try using a standard straight through cable. Get everyon working at 100/full. Cisco does not like to auto-negotiate with non-Cisco devices.- PuppetX
- Post #5
- Forum: Avaya (Nortel) networking solutions
-
Error: "Cannot open logging port to x.x.x.x"
What kind of terminal are you trying to break the router with? It does not work well with win 2k, NT or XP. You need to use Win98. -
AS5400 ports remain open
I have an AS5400 with 384 modems on it (3 x 108 + 1 x 60) I also have 16 channelised T1 lines in it giving a 1-1 modem to line ratio. I have noticed a peculiar habit when the utilisation of the RAS reaches 100%. After reaching 100% when a user disconnects the line is released bit the modem port... -
7206 rxload question
Here's the output: router>sh int s2/0 Serial2/0 is up, line protocol is up Hardware is M1T-T3 pa Description: XXXX DS3 XXXX Internet address is xxx.xxx.xxx.xxx/xx MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, reliability 255/255, txload 39/255, rxload 3/255... -
7206 rxload question
Need some help. I have a 7206 router with a DS3 serial link on one port. I have noticed quite often that when the input rate on the link is at the maximum the rxload figure is low, eg. 19/255 rather that closer to 255/255. I am also using mrtg to monitor bandwidth usage. Mrtg also shows the... -
Problem with cisco 7206
I've had this problem before. It is a memory issue. You either need to upgrade the amount of RAM in the router or manually tweak your buffers. It usually happens if you're using CPU hogs like eigrp or bgp.
