Search results for query: *

Could be wrong but I believe the loopback plug is pin 1 to 4 and 2 to 5

yes, you would use the first line of the access list to deny the x1 address but you also have to include the second line otherwise you will not NAT anything.This list will permanently deny the x1 address from being NATed. From a telnet session in priveledge exec, you would enter the command...

Here is what I use on my 2501 for DDR to ISP ! interface Ethernet0 ip address 10.1.1.1 255.255.255.0 ip nat inside no ip route-cache no ip mroute-cache no keepalive ! interface Async1 ip address negotiated ip nat outside encapsulation ppp no ip mroute-cache keepalive 10 dialer...

If you want to deny a certain IP from being translated, then you need to deny that address in the access list that is bound to your nat pool. ex. access-list 10 deny host xxx.xxx.xxx.xxx access-list 10 permit yyy.yyy.yyy.yyy zzz.zzz.zzz.zzz x=ip of address you want to exclude y and z=ip range...

The ip address of the remote router has to be in the same subnet as the local router. Instead of using ip unnumbered, I would create a subinterface on the remote router as well and give it an address like 192.168.77.21/24 Since your using a point-to-point link, i would also use a 30 bit mask

I have a Dell Latitude laptop w/ Matrox video adapter. The display is grainy and I can only get 16 colors and 800x600. I've tried to deinstall and reinstall the drivers many times. It used to work fine, but not any more..any suggestions?? Thanks.

I've got an IDE 20GB HD, but only 6 of it is available in Windows (CMOS sees all 20). Can I simply go to disk admin and use the Wizard to create a partition for that extra space? Do you have to have Unallocated space? Instead of creating second partition, can I just combine it with the...

I've got an IDE 20GB HD, but only 6GB is recognized in Windows (CMOS sees all 20GB). In disk administrator, how can I make the remaining 13GB all on C: instead of having to partion? Do I have to have Unallocated space? Thanks, Chris