Search results for query: *

Yes I have uninstalled and reinstalled the manager software as well as a different pc. Could someone point me in the direction of resetting and reloading software. I've downloaded the DTE maintenance pdf are there any other detailed instructions?

I believe I have. I did the At-X command first loaded the 3.0(99) bin then the 3.1(56) bin from the IP406v2 folder.

I have now reset connecting to the DTE port. Did the AT-X then the ip406u.bin loads from the tftp server, with the same end results.

I was able to get the Monitor working. There is an Alarm Log dump after Config Write Completed during the boot up sequence ALARM: -1/-1/00-1 -1:-1:-1 <corrupt IDS> <<corrupt ES>> CRIT ???? addr=ffffffff d=-1 pc=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff

I have a brand new IP406v2 out of the box I can bring up the conifg in manager but only if I change the broadcast to 192.168.42.1 I can not bring up monitor for this unit. When I try to change the programmin I get a TFTP error: Access Denied!!! Failed to send config... Have also tried a...

PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password owtGs6KjDVnHn encrypted passwd jDUXMyxQIVgK encrypted hostname pixfirewall fixup protocol dns maximum-length 512 fixup protocol ftp 21...

Ok, Need to re-visit this post again. I have added nat 0 access-list 101 to the config I'm still having the same issues the VPN tunnel connects authenticates but I cannot access any of the remote LAN resources from the VPN client using Ver (4.6.00.0039) I have the identical setup at other sites...

I'm connecting to the PIX using VPN client 4.6 but I'm unable to connect to my pcanywhere host residing on the LAN at 192.168.1.10 I have a similar setup at another location and it works fine???? Also is this config secure is there anything that could make it more secure? Thanks for any help...

Thanks, but I checked that field it is blank

I have just setup a new Domino 7 server for testing before going live. Everything seems to work ok except I cannot receive external e-mails. I can send e-mails fine. I can receive e-mails from my current production server on the same subnet. But when I try to send something from hotmail...

I'm trying to upgrade a couple of Netra t1 from 8 to 9 I just downloaded Solaris 9 9/04 and no of the cd's will boot I can access and read the CD's in the drive but I keep getting Can't read disk label error on boot, any help is appreciated TIA

I'm having the same issues with a IP 403 8 pots 2x4port analog cards the call disconnects randomly sometimes immediately sometimes after a few minutes. v1.4

IPsec..

Yes I am trying to VPN from my personal laptop to another network. When I am connected anywhere outside of any of the 3 networks everything is great but when I'm behind any of the 3 pix fw (all of which are 525's 6.1(4) I can't establish a link.

How do I go about setting this up? Is a issue of setting up PAT/NAT or making static mappings?

I manage a few remote sites via VPN everything works great from outside using VPN client. What I'm trying to accomplish is being able to use the client to connect to a remote site while being behind a pix. Scenario: Sites A,B,C are all secured by pix if I'm not at A,B or C I connect fine, when...

I have to seperate networks both running pix both configured the same except for the static IP's obviously. The one works great just the way it's suppose to no problems the other is 515UR with the following configuration, the problem is when inside users try to connect to the e-mail serve in...

I'm running PIX V6.3(1) and VPN Client 4.0(Rel) When I first set everything up it worked great I have not needed to use the VPN for a couple of months now, but when I recently tried using it again the client hangs a Securing commnications channel everything seems to authorize and it hangs I left...

Thanks for the input, but I have another thought. There will be a PIX 515 UR in place wouldn't I be able to access the DMZ on the other VLAN via the firewall? eg internal network on VLAN1 172.16.x.x and DMZ on VLAN2 192.168.1.x both connected to switch 1: Internal PC -> switch -> firewall ->...

I have a 62 seat operation that is being upgrading from a mess of dasiy chained hubs and switches. Everything is being cabled to a central location. I'm now trying to decide on how to best configure switches for optimal through put, expandabilty. 2 servers and highbandwidth dedicated internet...