Search results for query: *

Hi this is the url http://www.datexeurope.com/questions/questions_main.htm u can recover the data if it spins this site support the ibm hdd http://www.winappslist.com/utilities/recovery_utilities2.htm http://216.40.227.17/cgi-bin/htsearch?config=FH&exclude=&words=data+recovery&restrict=&method=and

Hi u USB hard-drive is gating Conflict with u cd rome drivr and may be with cd rw fist configure the cd rom and cdrw as the master and slave generaly slave config the jumper setting is geven on both the drive plz ref. the manul then uninstall the usb hard drive then check the jumper seting...

Hi find out that that hdd is working or not by removing the hdd of primary and connect the "Seagate ST380021A" and try format ti by ms dos after that it will det

Hi frend 1 put the operating system cd in u cd rom drive 2 cd rom should be first boot device that seting is done in u main board bios 3 follow the steps which is given in cd if u want to save u data then be carefull transfer the data to d drive format the c drive 4 about the...

HI if u have the driver cd if auto ply then ok if not then or go to setup and install another thing u have to find out that there is no Conflict in hard ware properties for u r sound card previous copy of driver must be removed of driver before go for installation of new one still problem is...

find out that the Asus P3V4X motherboard supports the 120GB or 80GB if it is not suppors then upgrade the bios var of u motherbord from ASUS site 2 option is that find out HDD jumper seting if that HDD is having the jumper seting in it's manual do accordingly samsong HDD is having that...

Hi plz find out while booting the pc the activaty LED of u FDD is glowing or not then check the power cable of the FDD comming from the SMPS then replace the data cable of FDD then another thing is that check the connector of fdd use the head clener of VCR and use it i hope this will help u...

Hi plz check out the boot sequenc in bois it shoud be hard disk first then as per u"r req. if still it not help u out then u'r MBR is no avalable inu'r hdd boot u'r pc from bootable flopy and gave command the " fdisk/mbr"

i think that every time new HW is gating installed and that"s why win install that driver and get rebooted or if u are using asus bord in bios there is one option if cpu get heated up it will automaticaly shut down the system check out bios or format the c drive and re install the win

if that hdd is mfd by samsong there is a jumper setting which has to be done plz find out the u'r bios support capacity of ide it totaly depend on u bios up grade u bios if it is branded then go to the site and up grade it bios this help u a lot