Search results for query: *

also check your modem settings - incoming calls can cause a modem to switch on the pc - same as wake on LAN

we are running ZFD 4.01 we are using group policys to lock down W2k workstations whilst atempting to setup Sophos Autoupdating from a central location However the user configuration element of the group policy (whatever setting are in the policy) clears the run as service settings on the...

Have you tried the last known good profile from the F8 option at startup?

How about dry ice in the side pods? :-) Sorry. Does the VGA Card get hot or is it thea chip on it fan? If it is producing big heat then it could be faulty and on its way out swap it out and see if this makes the difference. If its the mobo try a different slot. + what rockerfellerz said In...

I know this is after the horse has bolted but when your system is running again untick the reboot on system failure this will meen if you have another problem at some time you should see the windows blue screen of death with the reason for the crash - you could then at least search for the problem

Have you also tried running the boot repair from the reapair console incase it is corrupt? Failling that disable everything in the bios that is not needed to run the system and try the repair again

Have you tried last known good configuration? Throught the F8 option whilst the startup bar is loading I have had a problem with continual reboot and whilst not the same circumstance as you, this resolved the reboot problem. If the W2K startup bar is loading then your HDD sould be detected in...

We have moved from hardwired vcr security camera system to using AXIS 2200 camera's and Milestone security software. a 5 camera system running on a decent spec pc with 80Gig HDD lasts about 3 months with out removing any old data. the camera sends a very thin stream of data across our network...

Have done a clean install with com/parallel/usb disabled. closed down then started and enbelled devices system now closes down and restarts. Thanks

We run netware 6 on our servers, our GroupWise server recently went down due to a hardware failure on the mobo we had a redundant server from another project, the origional server was twin athlon mp based and the replacement was a twin intel based mobo with differnet ram etc. we had little if no...

Cheers, Looks like my weekrnd just got busy Thanks will post result here

Thanks for the response, There is more than 1 of use here, and we have been racking our brains constantley. This was our original problem: File "SYS:\SYSTEM\CONLOG.NLM" cannot be opened. Error: error code 144 (90 hex). (nwconfig-6-235) Press to continue. We have been down many...

I have a slightly different prob than posted before. I have installed XP Pro (and it installs no problem). As long as the system is running everything is fine. When I restart everything is fine. If I shut the system down and cold boot later, XP says that c:\winnt\system32\config\system file is...

Thanks for the advice The backout plan was using the restored data that included NDS (this was scuppered before we started). The overlay cd image will overwrite the existing system as it would only upgrade from 4.11, we are currently setting up an identical server from backups and will then...

we are currently running ZWFD 3.2 we did spent quite some time testing and setting up the imaging system, but it is worth the time. You do need quite a large amount of disk space on the server if you have multiple images, we have 5 different at the moment. The IP address is not an issue for us...

I ran upgrade (booted from CD) from Netware 5.1 (latest service packs) to Netware 6, but during install I got the message: File "SYS:\SYSTEM\CONLOG.NLM" cannot be opened. Error: error code 144 (90 hex). (nwconfig-6-235) Press to continue. Thereafter, though some files copied, the...