Search results for query: *

Need to program DIL 500

check if mail box except messages enabled

the ext need to have it set to B/NA forward to voice mail

have then shut their system down to see if the problem is still there.

Use alarm net radio cellular will meet your connection don't require two phone line

press program 99 then the button you want to use then 2 must add a 9 for idle line then phone number then press auto dial store.

hit your hold button quickly twice to put caller on hold only you can pickup caller.

What are you transfer call to ??

on phone press intercom 7311 then you will hear a long beep done.

Only call waiting tone

Mail box setup maybe all call direct to mailbox will not light message. Disable all calls to mail box. Require 999 setup mailbox COS

I have used an DSL filter at ext and solved the problem you have.. Good luck

sorry wrong direction It's when you call to an outside. It maybe you CO Card. Are you using a T1 or Pri?

voiceamil Menu DTMF Not set up to direct caller to depts you want. Like to ext...operator..UCD Group ext..etc

Day 603 for ring "Imm". Delay..No Ring or disable Night 604 it will for jack or ext you want the rings no ring will let you know that incomming CO Line you can pickup

Sorry didn't see using PR

Try setting up an XDP anlog ext to do the call forward.

List Program to check to enable 502 ext to outside co lines 503 ext transfer to outside co lines 504 call forward to outside co lines 205 / 206 time limit for outside co lines 601 class of service for ext 605 /606 outgoing co lines

Also you can not call from the phone you program with the phantom ext button that why you getting busy or invalid display.

Did you program the phantom ext on the phone using program 99 + Button 72 for phantom ext.