Search results for query: *

vodavi tech support

go to mibdepot.com they should have what you need. Look at the Basebbrd mibs

sounds like the system defaulted. Did they lose power? go to station 100 and see if it is up, at default that is the only station that will work.

Universal Day/Night Answer Description Incoming CO lines can be programmed for Universal Day Answer (UDA) or Universal Night Answer (UNA). UDA/UNA assigned CO lines can also signal over the external page port(s). If External Day programming is enabled and the system is in the day mode, the...

Is this on all phones? you will get that display if the phone is not programmed but if it is on all phones even 100 then the system may be bad. If you have changed ext numbers from the 100 range then find 100 and reprogram.

Found this on the Sandman's page If you're a telecommunications professional, call Tammy Reilly at The•Mart Magazine to get your free copy of the print version mailed to you. 800-864-1155.

5000 is the Mach-1 programming should be about the same, if the default 3226 does not work then the last person must have changed it. Only way to get in then is to default it and start over. Google mach-1 or Triad-s and you should find several sources to buy a manual from or register with...

Short answer is no if this is the sts vm card. System design for a pager. What I have done is put several digits (extension number or?) after the number in the notification setting that way it will out pulse those digits and stay on to your cell phone a little longer.

Thanks for the answer.

1. Can a soft phone have the same extension as your analog phone? 2. Any one using soft phone in a call group where calls come in and then once selection made several phones ring?

Well from some of the questions I see here, there should be some training classes. I can find several in the UK and Europe but none in US.

Anyone recommend a good training source for SNMP classes. Roy

station 100 is normally the admin station.

Phone admin is *3226, I would suggest you look in the manual for voice mail setting up. There are settings in the phone system and there are settings in the voice mail card itself. Phone settings can be done from the admin phone, VM will be done from PC with hyperterm.

Check Flash 50, page B, button 10 on that station. It sounds like you have off hook preference set to the 2nd station.

you will need ecom to do a download of the voice mail then you will have the config and can upload it to a new unit. If you haven't done it yet then go to the Vodavi web site and sign yo as a distributor and you will be able to down load ecom and the manual for the VM and it will tell you step...

flash 50 page C buttons 1,2,3 if I remember correctly.

1. Have CLID on the phone lines 2. Have a CLID card in the sts Should work out of the box if you have clid coming in from telco.

Sorry don't know the device. If it has a serial port for config they I would assume that you can change the settings for the community string from there.

Call tech support and get a new phone. You got one that was supposed to go to the Asia market, it sounds like.