a friend of mine asked me to look at his system to see if i could program it for ringing over the paging system at night i can set up the button for uda and it doesnt work after reading what docs hes got it says the trunks have to be programmed for UDA i can get into the programming port with my laptop but cant figure out how to set up the trunks programming. any help would be appreciated. or is it easier to program from a phone. ill be studying the manuals all this weekend.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
vodavi sts system 1
- Thread starter manersj
- Start date
-
1
- #2
Universal Day/Night Answer
Description
Incoming CO lines can be programmed for Universal Day Answer (UDA) or Universal Night
Answer (UNA). UDA/UNA assigned CO lines can also signal over the external page port(s). If
External Day programming is enabled and the system is in the day mode, the assigned
external page port(s) present a ringing signal. UDA/UNA is established on a per CO line basis
in admin programming.
When the system is in Day or Night mode and you hear an outside line ringing at another
station, and wish to answer it:
Dial [#5] on the dial pad or use the Soft Key’s UDA/UNA option. The connected outside line
can be transferred or disconnected.
Each telephone utilizing Universal Day/Night Answer must have a loop button
appearance if the ringing outside line does not display at their phone.
UDA/UNA only works on direct ringing calls. It does not work for intercom or
transferred calls.
Universal Day/Night Answer 2-313
Features and Operation
Starplus STS Systems Issue 1.4 - December 2004
Universal Day Answer (UDA)
Description
UDA-assigned CO lines can signal over external page port(s). External Day ringing is
programmed on a system-wide basis in administrative programming. Stations that do not
have access to a line during the day can answer that line while the System is in the day mode
by dialing a UDA code [#5]. To use this feature, a LOOP button or an appearance of the trunk
must be present on the station.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
XXX-XXX = CO Line Range
5. Press the UNIVERSAL DAY ANSWER flexible button (Button #7). The following displays:
6. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Universal Day Answer feature is disabled.
Operation
Upon hearing an incoming signal:
1. Lift handset.
2. Dial the UDA/UNA access code [#5] on the dial pad. You are connected to ringing outside
line.
CO LINE ATTRIBUTES
SELECT A CO LINE RANGE
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE B
ENTER BUTTON NUMBER
UNIVERSAL DAY ANSWER 0-1
DISABLED
2-314 Universal Day/Night Answer
Features and Operation
Starplus STS Systems Issue 1.4 - December 2004
Conditions
» During the Day mode, all common CO lines ring when programmed for UDA ringing.
» CO lines not programmed for UDA ringing do not participate in common audible ringing.
» If External Day ring is disabled, or the system is not in the day mode, external page
ringing is disabled.
» Ringing CO lines not assigned CO line group access for a particular SLT may be answered
in a UDA service. Dialing privileges are unavailable on CO lines to which an SLT does not
have access. CO lines without UDA status may not be answered or accessed via UDA
procedures.
» If two single-line telephones attempt to retrieve one ringing CO line simultaneously, one
user is connected to the incoming CO line, the other user receives intercom busy tone.
» The special ring mode is treated as day mode.
Universal Night Answer (UNA)
Description
If a line is marked UNA, this activates night service answering of incoming calls on this line by
stations not normally assigned access to the line(s) by dialing feature code [#5]. This station
must have a direct CO appearance or an available loop key assigned to do this. Lines marked
as UNA also activate Night Ringing over External Page when in the night mode if External
Night Ringing is set to Yes.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the UNA flexible button (Button #3).
CO LINE ATTRIBUTES
SELECT A CO LINE RANGE
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
ENTER BUTTON NUMBER
Voice Mail 2-315
Features and Operation
Starplus STS Systems Issue 1.4 - December 2004
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … UNA is enabled.
Operation
Upon hearing an incoming signal:
1. Lift handset.
2. Dial the UDA/UNA access code [#5] on the dial pad. You are connected to ringing outside
line.
Voice Mail
Description
Incoming CO lines can be programmed for Universal Day Answer (UDA) or Universal Night
Answer (UNA). UDA/UNA assigned CO lines can also signal over the external page port(s). If
External Day programming is enabled and the system is in the day mode, the assigned
external page port(s) present a ringing signal. UDA/UNA is established on a per CO line basis
in admin programming.
When the system is in Day or Night mode and you hear an outside line ringing at another
station, and wish to answer it:
Dial [#5] on the dial pad or use the Soft Key’s UDA/UNA option. The connected outside line
can be transferred or disconnected.
Each telephone utilizing Universal Day/Night Answer must have a loop button
appearance if the ringing outside line does not display at their phone.
UDA/UNA only works on direct ringing calls. It does not work for intercom or
transferred calls.
Universal Day/Night Answer 2-313
Features and Operation
Starplus STS Systems Issue 1.4 - December 2004
Universal Day Answer (UDA)
Description
UDA-assigned CO lines can signal over external page port(s). External Day ringing is
programmed on a system-wide basis in administrative programming. Stations that do not
have access to a line during the day can answer that line while the System is in the day mode
by dialing a UDA code [#5]. To use this feature, a LOOP button or an appearance of the trunk
must be present on the station.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
XXX-XXX = CO Line Range
5. Press the UNIVERSAL DAY ANSWER flexible button (Button #7). The following displays:
6. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Universal Day Answer feature is disabled.
Operation
Upon hearing an incoming signal:
1. Lift handset.
2. Dial the UDA/UNA access code [#5] on the dial pad. You are connected to ringing outside
line.
CO LINE ATTRIBUTES
SELECT A CO LINE RANGE
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE B
ENTER BUTTON NUMBER
UNIVERSAL DAY ANSWER 0-1
DISABLED
2-314 Universal Day/Night Answer
Features and Operation
Starplus STS Systems Issue 1.4 - December 2004
Conditions
» During the Day mode, all common CO lines ring when programmed for UDA ringing.
» CO lines not programmed for UDA ringing do not participate in common audible ringing.
» If External Day ring is disabled, or the system is not in the day mode, external page
ringing is disabled.
» Ringing CO lines not assigned CO line group access for a particular SLT may be answered
in a UDA service. Dialing privileges are unavailable on CO lines to which an SLT does not
have access. CO lines without UDA status may not be answered or accessed via UDA
procedures.
» If two single-line telephones attempt to retrieve one ringing CO line simultaneously, one
user is connected to the incoming CO line, the other user receives intercom busy tone.
» The special ring mode is treated as day mode.
Universal Night Answer (UNA)
Description
If a line is marked UNA, this activates night service answering of incoming calls on this line by
stations not normally assigned access to the line(s) by dialing feature code [#5]. This station
must have a direct CO appearance or an available loop key assigned to do this. Lines marked
as UNA also activate Night Ringing over External Page when in the night mode if External
Night Ringing is set to Yes.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the UNA flexible button (Button #3).
CO LINE ATTRIBUTES
SELECT A CO LINE RANGE
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
ENTER BUTTON NUMBER
Voice Mail 2-315
Features and Operation
Starplus STS Systems Issue 1.4 - December 2004
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … UNA is enabled.
Operation
Upon hearing an incoming signal:
1. Lift handset.
2. Dial the UDA/UNA access code [#5] on the dial pad. You are connected to ringing outside
line.
Voice Mail
- Status
Similar threads
