Search results for query: *

Hi there, can anyone tell me which new current DECT phones are compatible with the BP250 please? I have latest software and an ICCU2. My customer wants to buy some brand new DECT phones for it.

Has anyone had any experience connecting SIP Trunks from provider Vocus to MX-One 6.1? I have tried all combinations of settings provided by Vocus. The customer assures me the network connection from Vocus is there & has provided network trace to prove it. I'm just wondering if anyone out...

I should add that they use 68xx series phones.

Thanks ceejay55 I had already got that far as i previously mentioned however its still not working and I still cannot get the MitelDialer.exe to install on a windows 7 PC. Any other ideas please? Cheers

Has anyone been able to get Mitel Dialer V2 working with an MX-One 6? I have a client using Windows 7 with .net 4.0 installed and they are not even able to install the application. I have tried (without success) on my personal PC also running Win 7 and .net 4.0 with same result. Then assuming...

Thanks akademik, I don't know if the customer requires this but I will give it a go and let you know. Cheers dognbone

Thanks bojo387 Yes I have tried that but as you suspected it will not change the size of the font in the fields mentioned above. Anyone out there have any ideas please? Thanks dognbone

Hi All Does anyone know if it is possible to increase the font size in OWS? Not just the normal Font but ALL the fonts, i.e. for the sections for Name, Keyword1, Keyword2 etc? Any help would be much appreciated. Thanks dognbone

Hi Daddy, Just had a chance to test it with the customer and it works perfectly!!! Thanks very much :)

I have a customer with a BC9 MD110 and they are trying to divert an ACD group to an external number by dialling a service code. I have programmed the supervisors phone to be both a master extension (SPEXI:Dir=xxxx,OPT=M) and set bit one of Serv to be a 1 for ACD supervisor. The ACD group is...

Ive just connected a Spectrum 320c wallboard to a CCM PC and it is currently configured to address 00, does anyone know how I can change it to address 01? Ive heard that it can be changed via a special bit of software working on the RS232 into the RS485 converter. Any help would be greatly...

Hi ftogpx Try this: EXCCP:CCAT=47; dognbone :)

Hi Isinor Sorry about the delay in my reply. I should have pointed out that the Crimp system is based in Australia anyhow the website (just in case you are still interested) is www.crimp.com.au dognbone

Hi How many port voicemail do you need? If you only need a 4 or 8 port there are a few small PC based systems on the market. I can highly recommend a system by Crimp that i usually install for customers it has all the features of the expensive ones mentioned here, it's far cheaper, just as...

Thanks ogiebendogie I have had a quick look at their website but unfortunatly I am in Australia and they are in the USA, however I will get in touch with them and see if they are prepared to post some over. dognbone

Recently I have tried purchasing some of those annoying little strange shaped plastic inserts that sit over the extension number card under the handpiece on the 3000 series phones as most of my users seem to loose them. Damovo tell me that they are no longer available since the introduction of...

You would probably also have to program the info in the node that has no voicemail with the actual voicemail pilot number so that when the message wait button is pressed you go to the voicemail i.e. ICMWC:SID=1,KFCN=MWC,DIG=(PILOT NUMBER);

Hi The 2 tables below show 1st the different types of boards and how many circuits they have and what their BRDID is. The second shows what each type of board can be used for (some boards can be used to do several things) Table 1: DEVICE BOARD BRDID NUMBER OF IND. ALU1 19 1 ALU2 96 1...

I had the same problem at a site which could not be resolved and in the end I used a TLU79 interface and setup a route so that the 1st B1 could be selected 1st. The only problem with using a TLU79 is it provides an unpowerde bus so the equipment you connect must supply power. If you do have a...

I have a site connected to Cisco on a BC9 MD110 using a TLU76/1. Here are the route parameters:- <ROCAP:ROU=45; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 45 111000010001 3 3100000000 0 30 128 00151515 111110000031 101100 END...