Search results for query: *

Download the latest driver release off of DIGI's website and it should load OK.

You can use Norton Ghost but the new drive has to be identical size and model as the old drive.

Here's all you do: vi etc/rc.d/8/userdef drop down to last entry add the line: route add default 192.168.0.1 (192.168.0.1 represents whatever the gateway is) esc to beep save file. chmod 777 userdef. reboot and you should be able to ping.

Yes it would be pretty straight forward. It just requires swapping the tape drive and going into mkdev tape logged on as root. You then remove the existing tape drive and before exiting add the other tape drive. Then rebuild and reboot. I suggest Seagate 24GB DAT drive. They come with an...

Unfortunately it sounds like the OS is crashing. It may be coinincedence that it happened after a kernel rebuild. Probably will take a reload of the OS. Could be a bad hard drive also.

Usually when I get this error it means you probably need to remove the card and loopback adapter, relink and reboot, then add it back and relink and reboot. I have had a similar error when adding a new card without removing the existing loopback adapter under Network Configuration Manager...

I have a problem. I have an HP Netserver LH3000 loaded with SCO Unix Openserver 5.0.5. It has the ability of 2 cpu's. I added another cpu and the HP sees it fine. The customer this is installed at accesses the Unix server through TCP/IP. When I load the SMP Multiprocessor supplement and...