I found the Fiber converter box I needed from IMC Networks. It works great. I am using the NTDK85AA Dual Port DB and a NTDK25BB Rec. card. These are multimode cards. This is where the customer put single mode fiber in the middle and to the expansion cab. I can still use the nortel daughter...
I thought if I changed the DB's out with IP- either 100BaseT or 100BaseF that I needed SCC controllers at each of the receiving location(expansion cabinets)
I do have a dedicated fiber strand from Main Option 11 Cab to Expansion Cab. The customer just put a single mode fiber in the middle. It leaves Multi-mode from the Main Cab. but out about 200ft or so it stops on the Multi-mode and needs to connect to Single mode. Single mode goes to the location...
I would like to extend an Option 11c Expansion cab. across campus. About a mile. I have an NTDK85AA Dual Port DB and a NTDK25BB Rec. card. These are multimode fiber cards. The customer installed Single mode in the middle.... I need a box that can convert this multi-mode to single mode. What is...
I found it... It is in the RDB LD 16. Feature OAN should be set to "no" It was a "Yes"..
OAL -CDR for outgoing calls should be "yes"
OAN -CDR for answered calls only. set to "No"
Changing OAN to a "No" applies Reverse Battery for Answered calls and Trunk Seizure for unanswered calls
I found it...
I use a call acctg software pkg. but I have disconnnected that and I am looking at raw data from the SDI port. If the called party does not answer I never get a record. I printed out the CDR block from ld 21 and I didn,t see anything there that would do the trick. I thought maybe it might be in...
I would like to get CDR Records on calls that do not get answered. If I make a call and the called party answers I get a call record but not if they do not answer. They have an Option 61c with Release 3.0 software. It's a union issue for call outs for overtime.
Any programming examples for the Reach Line Card. I have a DSL circuit I will eventually connect to. I also have Configuration manager fo the Reach Card. I am using a 2616 phone with a 9110 unit..
Is there any device that will use a digital port from an Option 11c that will allow connection to the overhead paging system. I do not want to add a trunk card or an analog line card, but I do have some digital ports available.
does anyone know if you can have account codes for the Nortstar MICS Rel 6.1. I have a school that wants anyone to be able to use any restrcted phone by dialing a outside number then entering an account code to get out. The account code then needs to sent out to the SMDR stream.
I used the NTDK99 because I only have one remote. I retured the NTTK01 to Nortel and ordered the NTDK99. I used a sales bulletin to get the parts. 1332-G Dec 2000. I also have access to the Nortel Configurator to get my parts list. After the customer told me they have a 1-ghz Lan Network to that...
In regards to the answer:
Can you replace the daughter boards with 100BaseT boards, and then use new external 100BaseT/100BaseF converters?
It could work out cheaper, if its possible. NZTECH
That's what I did.. It did work out less $$
I have 1 Option 11c Release 25.40 that I want to connect to a second cabinet using Fiber. It is about two miles away.I have NTTK01AA Single port 100BaseF daughter boards at each site. The problem is the the customer told me they have multi mode cable between these sites but it is single mode. I...
This customer only has fiber to this site. There local network is across this fiber. There is no copper for an analog phone. I found a product on the internet from TC Comunications.
www.tccomm.com
Model TC1910. I can connect these units to the LAN at the main site and remote sites and get an...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.