Search results for query: *

But, does anyone know what I can do with that door phone, it keeps jaming the system?

Found the solution. Seems the original eight-wire-Merlin wire was defective somewhere along the lines -- had to re-wire the extentions from the processor and everything works fine now.

Found the solution. Seems the original eight wire Merlin wire was defective somewhere along the lines -- had to re-wire the extentions from the processor and everything works fine now.

We'll try removing the line protector next. Also noticed that when someone rings the door phone during an incoming call, the incoming call rings very low, but you can still see the blinking light, so in itself that's no problem. The door phone rings loud and clear. Don't know if that's normal.

After studing this problem for some weeks I've found that voice mail does not always pick up when there is no ring-blink of any phone; but sometimes voice mail does answer without ring-blinks. NONE of the extentions ring in that case. The 2 card slot was replaced with a 5 card AND same problem...

Yes, auto attendent is set the same on all ext. I had reset each phone to ring when I installed the door-phone, but today I set only four of the tweleve extension to ring. I measured each of the four lines as follows: Line 1 is 31.84mA Line 2 is 31.70mA Line 3 is 30.08mA Line 4 is 31.80mA Don't...

We've swapped out the 2 card carrier for a 5 card, but the intermitent problem of no ring-no blink still occurs. The processor was never really hot anyway. The tips on low current do not apply [http://sandman.com/etc] - there is no "poor voice transmission quality" nor "low...

>have you checked loop current ? > too high and it can fry cards the Lucent 146C Line Protector CO should protect 100% >I would also put a meter on and check ring voltage the lines do not ring for about 15 minutes at a time, then everything works fine. If we happen to pick up the phone line...

Half of the extension ring. And the first processor lasted three weeks before calls stopped ringing thru all the time. The replacement lasted abut a week. Only about 20% (a guess) of the calls do not indicate on the extensions, the rest ring and blink lights as normal.

Help! Sometimes during business hours the lines do not ring, and they get picked up by voice mail when ringing is not heard (after four rings, as they should). What do I check to get the extensions to ring and blink all the time? We had a Merlin 410 wired with 4pair; 4 lines in; and ten...

also includes a voice messaging pc card r2.

Forgot to mention that after hours messages are kept by the phone compnay voice mail. After thoughtfull consideration I think a Partner ASC system will work best: R5 processor (software from web); 2x 308EC; 5 slot carrier; 1x 18D phone; 10x partner6 phones; and a contact closure for 2...

Anyone recommend a newer phone system with a small price to replace an 820 Lucent with four lines and eleven stations. The phones are analog 5 button. presently the intercom/door opener is a separte system. the credit card swiper runs part-time off the fourth line, and the fax machine has its...

goto http://www.avaya.com/ pick Support from the top bar, then Technical Database then from the left side Software & Firmware Downloads from the right column goto 'Call Accounting' and pick LEGEND/MAGIX WinSPM the upgrade is there.

try: http://www.metrolinedirect.com/mer820conun0.html