Search results for query: *

we are using WINS,however we also have entries inthe lmhosts files on the DCs. Rick

We've had this trust relationship setup for years now. It goes down when we have WAN problems, but we are always able to re-establish it with no problems. This is s 2-way trust. We have out domains in WINS,and in lmhosts. When I do a nbtstat -c I can see that the domains are pointing to the...

I just looked at my CSU, and it was set for 56k, instead of 64k. I changed that and theinterface came right up.

We had a split T-1 installed. I am using a TSU 120 to split the line, and the voice is going to my phone switch and the data is going to my Cisco 2610.I am having a problem getting my 2610 to stay up. My line protocol is down. I think it has something to do with the clocking settings...

Thanks, boot -r worked. I can now see my drives. Problem number 2: when I type the dd command I am getting an error. Here is what I am entering: dd if=c0t1d0 of=c1t4d0 I get a response back that c0t1d0 open: no such file or directory. I have tried putting /dev/ in front of it. Is this sytax...

I am having a problem copying a hard drive. I need to create an image of a drive(D1) from Solaris. I cannot get root access to this drive. So here is what I did: I installed Solaris 8 on another drive (D2), moved the original drive to target 0 unit 1. I also hooked up a sun external drive cage...

Yes we are using NAT, and we are also using static address mappings to public addresses.

That is already done. We can receive e-mail fine from outside sources. We just have a problem getting mailfrom out own IIS server.

I have our servers configured on the inside of the PIX with static maps pointing at public addresses. We are having a problem with our IIS server not being able to send SMTP mail to our Excange server. We can receive mail fine from outside sources. The IIS server can also send mail fine to...

We are currently running our PIX with only 1 problem. Our IIS machine is on the inside with a static mapping to an outside address. The same is true for our mailserver. We can receive mail with no problems from outside sources, however we cannot send mail from our IIS server to our MAIL...

You can use the 3640 from the corporate LAN/WAN to achieve this.

Thanks. You saved me a ton of time disabling everything to get to the culprit. Rick

Do the networks have different IP address ranges? I would suggest Access Lists. This link should give you a good idea on how to configure it. http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1826/products_configuration_guide_chapter09186a00800877e2.html BDSSBRD

I have a Compaq Proliant 1850R that I am trying to install RedHat 8 on. I have a SmartArray 3200 installed, and trying to RAID 4 9GB drives. The systems freezes during the point of the installation that RedHat is probing for devices. It freezes right after it successfully probes for the monitor...