I have a 2611 with an upstream frame T1 on s0/0 and a normal LAN on e0/0.
I was recently asked to provision a DSLAM (Coper Mountain CE150) such that all remote systems appear to be on the local LAN. Hey now, don't tell ME it's stupid, I know it is. :-) My other network with an identical...
I have a 2611 with an upstream frame T1 on s0/0 and a normal (subnetted) LAN on e0/0.
I was recently asked to provision a DSLAM (Coper Mountain CE150) such that all remote systems appear to be on the local LAN. Hey now, don't tell ME it's stupid, I know it is. :-) My other network with an...
I'm trying to maximize throughput between my Samba server and my Win2k clients. Samba's configured to allow up to 64k packets and the server is on a GigE network with SCSI UW2 drives (software RAID1 and RAID5 volumes). All clients are 100MB/sec FDX on a switched LAN.
I can get sustained...
We don't use a WAN card (our uplink is ethernet straight to the router).
SCM HW version is 1.0, 5.0.94 (PROM 2.10.45).
BCM is HW 1.0, 5.0.94 (PROM 1.40.18).
CPE is varied... SpeedStream 5250s, Xpeed x320 and x310s and even some PairGain Megabit Modem 300Ses (not sure if those are going to...
Plain-jane CopperEdge 24-port SDSL DSLAM. I'm able to set it up such that each SDSL modem in the DSLAM has an IP, but that seems wasteful to me, especially since all those head-end modems have no real need for an IP.
Reading through the documentation, it sounds like it's supposed to be...
re: spellchecker: I haven't heard that. I do know that it seems to be US English only (I'm Canadian).
One thing that you will all want to do is get an uncrippled FreeType2 library and install it, and then put
export LD_PRELOAD=/path/to/libfreetype.so
in your soffice shell script. The fonts...
I thank you for your time but unfortunately it doesn't answer my question.
I already have fwd no answer and fwd on busy set to go to set 251 (voicemail) - Feature 85 *is* DND; they are one and the same.
If I have DND set and someone tries to transfer a call to me or page me, they get a...
That is one of the things that StarOffice offered over OpenOffice. Unfortunately even SO6's WP input filters are terrible and aren't complete on Win32, and nonexistant on Linux (confession from Sun).
Sorry for the bad news. Perhaps some googling will reveal a WP->x converter. Or if you have...
I have purchased SO6 and use both SO6 and OO1 -- there is no noticeable difference between the two
Adabas D is the "Access" component in SO -- it's shite. Complete and utter shite. If you're putting this into a business, set up a nice PostgreSQL server and use ODBC to access it...
Under linux you should be able to do something like
dd if=/dev/hda of=/dev/tape
and then reverse it, although I don't know how well it's going to go if you're moving to different sized hard drives and so on. I imagine dump would work as well.
If you wanted to get fancy you could pipe dd's...
I wonder if that will work with my 3300 as well.
I found the backdoor password when I started this job and was able to clear it. Now I can't even do that. 3Com claims you have to send the unit back, but they'd have a procedure to clear it so I'm hoping someone out there has it too. :-(
I'm having some trouble finding detailled information about the various CTA modules available to users of the Nortel MICS system.
I have two basic questions: Are the API/specs for the internal cards available to alternate operating systems (Linux primarily, but also QNX is another option)? I...
This is on a Nortel MICS system, StarTalk Flash (4 port) voicemail system.
I would have expected that if a phone was set to DND a call transfered to it would go directly to voicemail. Instead the calling extension gets a "do not disturb" message instead.
Is there a way to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.