Using Do Not Disturb:
Once you turn Do Not Disturb on, calls are forwarded to the
prime telephone only if there is no other telephone on which
the line appears. If there is another telephone that shares the same line, the call may be answered by that person. (The
Delayed Ring Transfer feature transfers all unanswered calls
to the prime telephone after a specified time.)
Do Not Disturb prevents voice calls from alerting at your
telephone. Voice calls are presented as normal intercom calls.
Stopping calls
Press Feature85 to stop calls from ringing at your
telephone. Only priority calls ring at your telephone. A line button flashes when you receive a call, but the call does not ring.
Changing the Fowarding capability on a phone
To enter a programming session, follow the next few simple steps:
1) Press FEATURE * * 2 6 6 3 4 4
2) Enter Password: 2 6 6 3 4 4
Display will read: " Terminals & Sets"
3) Press: SHOW
Display will read: "Show Set"
Enter the extension number that you want to change
4) Press: SHOW
Display will read: "The extension number and the current name"
5) Press: SHOW
Display will read: "Line Access"
7) Press: NEXT
Display will read: "Capabilities"
8) Press: SHOW
Display will read: "Fwd no Answer"
9) Press: SHOW
Display will read: "Forward to: ___"
Enter the extension number for where you want the calls to go
10) Press: NEXT
Display will read: "Forward delay: __"
Enter the number of rings
11) Press: NEXT
Display will read: "Forward on busy"
12) Press: SHOW
Display will read: "Forward to: __"
Press the change "softkey" and enter the
extension for where you want the calls to call
Good Luck!!