Search results for query: *

More info that may be related. We are seeing a lot of 'No translation group found' messages on the 525 during times when we are seeing the most issues. src is servers from the web farm. dst is the NAT address from the Pix 515 from the remote site we're experiencing problems from.

We have a Pix 515E with a VPN tunnel established to a Pix 525. Behind the 525, there is a web farm serving content to users behind the 515E. The 515E PATs the user connections across the tunnel and for the most part, everything works ok. During what seems to be busy/active periods throughout...

I used luxadm to remove and re-insert one of the 'Invalid WWN' disks and that cleared the error for all of them. Note that in the /var/adm/messages log, I also saw the following message as I did this: Unable to allocate target structure for switch setting XX reason: ISP fw not done with PRLI...

Today I shutdown an E450 connected to a set of A5000s, both A5000s are setup in a full loop configuration. When the system's power was off, the fiber cables were removed from the 450 while it was opened up for maintenance. Once all cables were replaced and the system booted up, there were 3 out...

I have not tried that. Unfortunately, this is a production server so I only have an opportunity to take it off-line to try something like on Saturdays and I only get a couple hours. I did dig up some more info that shows the system does recognize there are cards there: # luxadm -v qlgc...

I just added 2 A5000s to an E450 running Solaris 7. Both are attached to the server in a redundant single-loop configuration. Each A5000 has 2 interface cards, 1 GBIC per card. Each GBIC is tied into its own HBA in the 450. I believe all the HBAs are using the Qlogic 2100a chip. When I...

I just added 2 A5000s to an E450 running Solaris 7. Both are attached to the server in a redundant single-loop configuration. Each A5000 has 2 interface cards, 1 GBIC per card. Each GBIC is tied into its own HBA in the 450. I believe all the HBAs are using the Qlogic 2100a chip. When I...

Well, I did just try replacing the drives and that did seem to do the trick. I would still be interested to know whether or not anyone has any further info regarding the meaning of those error messages. Thanks! Troy

An A5000 that was recently attached to a Sun 450 (running Solaris 7) appears to have a few disks in the enclosure that have problems. This is a new array, so before I blindly assume they are simply bad disks, I was wondering if someone could help me interpret the following message: # luxadm...

I have 4 Qlogic 2100A HBAs I need to add into a 450. At the moment I only have 3 free 64-bit slots and by the cards size, it looks like they would have to be installed in those.. I do have an old unused ethernet card tying up another 64-bit slot, so I'd like to remove it and put one of the...

Last night I attempted to retrieve a saveset from a PC Archive pool to a specific location on a UNIX filesystem. I successfully identified the saveset, and once I started the retrieval I noticed through nwadmin that the UNIX client was 'reading' the 30G saveset. It read for about an hour and a...

I have a RAID 5 filesystem that reported a disk failure on sda5 and it has disabled that device from the RAID 5 disk set. That same disk has 2 other active partitions that are functioning just fine, /dev/sda1 and /dev/sda6. I expect this means that the disk didn't fail itself, but the...

Someone made a boo boo and changed all file permissions on an NT system that we have that is backed up with Networker. Does anyone know if there is a way I can recover JUST file permissions on that system without modifying data that may have changed within? Thanks! Troy

We are using the 'archive' option available for Legato. Not a typical full/incremental backup.

Devices are DLT7000s. 2 drives in the Jukebox. On the archives, when the display that they are writing, it's between 200-300K/s. 4 savestreams per device, parallelism of 8. Nothing has changed. Full backups still take the amount of time they always have. We just haven't run an archive in a...

We're taking a couple of Windows servers off-line and are trying to make archive backups of the systems. For some reason, the archive is taking a LOT longer than expected. A typical Full backup of these systems used to complete in 4-5 hours. Right now, one of our archive runs has been going...

I was upgrading a system from zlib 1.1.3 to 1.1.4 and I removed 1.1.3, using pkgrm. When I went to install 1.1.4 with pkgadd, it complained with the following error: The following files are already installed on the system and are being used by another package: * /usr/local/lib/libz.a * -...

Is there a command I can use to determine how specific processes are swapping by PID?

Does anyone know whether or not you can use the 'eeprom' command to set the 'disk-led-assoc' variable? If so, would a reboot still be required before you'd have visibility to the devices in slots 4-19? Also, could setting this variable have any impact on disks in slots 4-19 that are already in...

I have an E450 with disks in 18 of the 20 internal slots. Using prtconf -vp | grep slot#, I have discovered the device IDs of the disks in slots 0-3 that are using the internal controller. The other disks are in use, but the slot #s are not showing up on this system. I'd like to figure out...