I have 2 domains D1 and child domain D2. I can see and verify that the trusts are set up correctly. D1 and D2 are connected via VPN and I can ping using the server name or IP Address, I can logon to either domain from either site. The problem is: I set up a shared folder, on a server (S1) in...
I have a Proliant 1850 with at 3200 Raid Controller. There are 3 18GB HDD in slots 0,1,2 set for RAID 5. I powered the server off and added a tape drive, when I powered up the server drive 0 was bad and I had to press F1 to continue. The server booted fine and the drive in slot 0 was flagged...
OK, now that we got the software needed to look at these Centillion 100 switches. I need to know how to configure the ATM ports to connect 2 switches together in one big subnet. Any thoughts/problems?
Thanks in advance.
Did you try and reset the system back to the factory defaults? I suggest doing that and then start from there. I purchased speedview 4.1.2 and with the c100 switches I have I probably need ver 5.1 or 4.3.2. Do you think I can borrow a copy of ver 5?
You can go to codemicro.com and order part number AS0018003 the 25-pin to 8-DIN cable for the C100. I just need the updated s/w, my switches have been updated.
Could i possibly get a copy of you version 5.1 something. I also purchased the C100 switches and have vers 4.1.2. I could not configure the switches because the software is not up to date.
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.