Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
NF3500 boot fails
Yesterday I loaded a new OS (win2k3) on an NF3500. The machine has serverraid in raid5. The OS installs without problem including doing the different reboot cycles during installation. However, once the install completes and the machine attempts its first boot, it hangs after the Windows... -
looking for the ServerRaid download site?
Found it. Here it is if anyone else needs it: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-495PES -
looking for the ServerRaid download site?
Can anyone point me to the current address to download serverRaid 3.50. Thanks -
setting write through / write back
I'm trying to diagnose a disk size error under serverRAID. I notice one of the disks in a Raid 5 array is set to write back. The others are set to write through. Is this likely my problem? I dont seem to be able to change the setting using the serverRaid tools. Is that a configurable setting... -
ServerRaid & Netfinity 3500
What version of ServerRAID bios should a NF3500 run? Can I put a serverRAID-3L card in a NF3500? What do I need to do about bios updates for the card and for the server to make that work. -
ServerRAID-3L
I've been doing some more reading and I think this condition may be due to incompatible bios levels in the server. Problem might be I am trying to install this to a Netfinity 3500 server. Since the latest server bios is 1999 (present on this machine) could someone tell me if I need to update... -
ServerRAID-3L
I just bought a secondhand serverRAID-3L card. The bios on the card is 7.1018. I'm having some trouble configuring 3 disks in 2 arrays. The 3rd disk (single disk array) always goes defunct when I hit the "Apply" button. I'm wondering is the current bios correct for this card. What version of... -
server errors
Hello Forum, I have been trying to install Domino 6 onto Suse 8.2. I also tried onto SuSE Enterprise Server 8. Same issues arose. When I start the Notes server, I'm getting two port conflict errors: "Port=6400 errno=98 Address already in use" and "TCP/IP port Nr 25 is already in use on this... -
Newbie question
When I try to access my ldap server using the ldap browser I get the somewhat terse reply "protocol error". What is it telling me? How do I fix it? Thanks -
help for a newbie -ldapadd
I'm really at the beginning of an ldap learning journey. Hope someone can explain this error and suggest how I can fix it: ldapserver:/# /usr/lib/openldap/slapd ldapserver:/# /usr/bin/ldapadd -x -D "cn=root,dc=office, dc=local" -W Enter LDAP Password: secret ldap_bind: Invalid credentials: (49)... -
NF5500 video problem under linux
Thanks Catorze Yes, the low resolution is more a nuisance than a problem. Anyway, for the benefit of any other members who run across this I fixed it with vga=788 at the root prompt. Can also be changed at the grub interface. -
Intellistation MPro ServerRaid Version?
What is the appropriate serverraid version for an Intellistation MPro (P11 450)? Thanks -
Installing Samba3 onto Suse Enterprise Server 8
Has anyone managed to do this? There seem to be more than a few dependency issues and I'm looking for a guide as to the best sequence and approach for solving them. Appreciate all help Thanks- cmoloney
- Thread
- Replies: 1
- Forum: O/S Other general discussion
-
IBM ServeRAID problem with windows 2000 or XP
I've never had any trouble with Win2k, but you seem to have something a little different there. I think there maybe a serverraid version with software config to launch win2k installation on the ibm site (not sure - but check it out) In any case if you get the drivers and copy them to a floppy or... -
NF5500 video problem under linux
I guess someone has hit this before. If so I hope there is a way forward. I just installed SuSE Linux Enterprise Server 8 on our NF5500 and - alarm & dismay - SuSE doesnt have any drivers for the onboard S3 86C775/86C785 video chipset. Can anyone tell me if there is a way around this? Cheers -
Fibre Channel and NF5500
I have fitted 6 new fibre channel Ultrastar disks to a NF5500 and everything seems to work fine. Checking the IBM site for updates I see there are a plethora of files and patches for fibre channel on an NF5500. I guess I dont understand enough about the technology. Could someone help me with... -
Set Up Process
This is a really basic question from a very new Domino admin. Real NEW. I'm trying to set up a Domino domain on Linux servers. Install is no problem. Getting a remote Windows client running is no problem either. Where I'm completely phased is in setting up the servers. First server1 then server2... -
Also want to increase disk capacity
Like others in recent threads I want to increase disk capacity on a PC330 server & also a NF5500M10. My questions are about how to decide which disks to use. I have checked the ibm site to get specs. However neither machine currently has disks with P/Nrs, Fru/Nrs or model numbers specified on... -
Linux & ServerRaid NF3500
I've got some retired IBM servers (PC330, NF3000, NF3500, NF5500)that I want to bring back to life in a SuSE Linux network. When installing SuSE it seems to pick up all the drivers etc fine, but I'm not sure how well it is working with the IBM ServerRaid on the machines. For safety sake I... -
How does this happen?
Hi Forum, I'm toying around in a test network that has 3 machines: two Win2003 Domain Controllers and one Win 2K client. The first DC also serves DHCP to the client. Everything was fine until I booted the second DC. Then the client's Event Viewer (System log) filled up with this error: Event...- cmoloney
- Thread
- Replies: 1
- Forum: Microsoft: Windows servers
