Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. RalphHered

    Passageway for Melin Legend

    Does anybody know where I can download the updates to the Passageway software? The version that came with the device only works with Windows 3.1. I've looked everywhere on the Avaya site. I would like to integrate it with Outlook. Thanks, Ralph
  2. RalphHered

    Reconfiguring a Legend system

    Thanks to all. We now have the phone system working with our lines. Our next step is to ge the voice mail system to pick up the lines but that is another issue for another thread. Thanks again.
  3. RalphHered

    Reconfiguring a Legend system

    Hi Franke. Yep. I verified that the ARS table only had the 70 pool in it. It actually had 70 and 830 but we removed 830 and reset the system. The lines are LS and I can get a dial tone when connecting an analog phone line on them. When I dial a 9 to get out of the PBX, I get a second dial...
  4. RalphHered

    Reconfiguring a Legend system

    TouchToneTommy - We did what you said and added the LS lines to the #70 pool, removed the other lines from the #70 pool. But, I cannot get anybody when I dial out of the PBX or cannot call into the numbers. I also did checked the ARS tables and everything appears ok. What am I missing?
  5. RalphHered

    Reconfiguring a Legend system

    Sorry. We are reconfiguring a system with the same modules. We are converting from a DID/T1 configuration to a series of POTs (LS) lines. I've looked at all of the manuals, I believe, and I have not figured it out yet. The We have 400 and 408 modules in the PBX. Thanks.
  6. RalphHered

    Resetting Merlin Legend Password

    Thank you. I connected to the system through the admin port and was able to reset the password. Now, do I need an upgrade/install card in order to change my configuration from a DID/T1 setup to a LS setup? I am very new to this but am trying to figure it out by myself before I have to shell out...
  7. RalphHered

    Reconfiguring a Legend system

    We have a Merlin Legend R3 system that is about 8 years old. We are moving from a DID trunk to a series of LS lines. I've been trying to get to the admin port but did not have a 355AF connector. The main console continues to ask for an upgrade/install card and we don't have one. I got the...
  8. RalphHered

    Resetting Merlin Legend Password

    Is there a way to reset the password from the main console of a Merlin Legend R3? We have forgotten the password and need to reconfigure the system.

Part and Inventory Search

Back
Top