Search results for query: *

remove this line from eth0 ip access-group 1 out

u need to reveal the mask ip address. It could be e1 is inside e0 host address range.

Mac people likes to make things simple. Hey folk do this. You gotta plumb the interface to make it work!! Enable TCP/IP stream to that interface. # ifconfig hme0:1 plumb # ifconfig hme0:1 192.168.2.1 netmask 255.255.255.0 up # ifconfig -a Viola! To make it appear, follow the gentleman above...

hmmm....use fsck -y /dev/rdsk/c0t0d0s0 or whatever u installed the boot partition to avoid a long series of prompting and questioning.....gee.. if the partition is screwed, run # installboot /usr/platform/`uname -i` /lib/fs/ufs/bootblk /dev/rdsk/c0t0d0s0 This will make your disk...

Down the interface # ifconfig hme0 plumb Enable DHCP on your interface #ifconfig hme0 dhcp if you rx error messages regarding timeout, check the DHCP server. Check the dhcp status #ifconfig hme0 dhcp status you also need tp create /etc/hostname.interface /etc/dhcp.interface Goodluck!

# ps -ef | grep sendmail if sendmail is running, check sendmail.cf and look for DS=yourmailer@domain.com This is your relay mail server if you using a relay to send mail else leave it empty for direct sending. # echo "test" | /usr/lib/sendmail -v id@domain.com You will see...