Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. UlteraTapeRAID

    DLT7000 Specs?

    The DLT7000 tape drives' native transfer rate is 5MB/Sec. I would first suspect the block size being used by Legato. Check the NSR device resource attributes using nsradmin. Make sure the volume block size is set to 64K or larger. Also, since the tapes are storing more data than before, it...
  2. UlteraTapeRAID

    DLT7000 Specs?

    The DLT7000 tape drives' native transfer rate is 5MB/Sec. I would first suspect the block size being used by Legato. Check the NSR device resource attributes using nsradmin. Make sure the volume block size is set to 64K or larger. Also, since the tapes are storing more data than before, it...
  3. UlteraTapeRAID

    AIT DRIVE CLICKS INTERMITANT

    When an AIT drive is accessing a tape media and reaches a write retry limit or read retry limit, it attempts to clean the tape head with an internal mechanical head cleaner arm that makes a click sound when it is activated. If this process continues, the TAPE LED will begin to flash slowly...
  4. UlteraTapeRAID

    Ultrium

    Have you looked at the tape drive properties and set the tape block size to the largest size possible?
  5. UlteraTapeRAID

    Stop booting if the surestore is running

    Sounds like a basic SCSI termination problem or cable (bent pin)issue, have you resolved this problem yet? What kind of SCSI terminator are you using? Are there any other SCSI devices on the same SCSI bus?
  6. UlteraTapeRAID

    9730 Timberwolf library on HP-UX 11.0

    thelmaus (MIS) As for a way to make copies of the tapes for offsite storage, have you thought about using hardware tape mirroring within your 9730 tape library to create an "On Site" and "Off Site" copy of your tapes simultaneously, in the same time it takes to do a single...
  7. UlteraTapeRAID

    Tape to tape copy utililities.

    Have you thought about using hardware tape mirroring within your 9730 tape library to create an "On Site" and "Off Site" copy of your tapes simultaneously, in the same time it takes to do a single backup? Check out Ultera Systems web site http://www.ultera.com for a real...
  8. UlteraTapeRAID

    Tape RAID issues

    Have you resolved the issue you reported back in January? I would like to propose an alternative solution available from Ultera Systems, Inc. (www.ultera.com 949-367-8800) using a hardware tape RAID controller to transparently operate your Exabyte 430m library. Check out our web site...

Part and Inventory Search

Back
Top