Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stop booting if the surestore is running

Status
Not open for further replies.
tdempfle

tdempfle

Technical User
May 23, 2002
1
DE
Hallo,

i have installed a new compaq server with W2k and there is a HP surestore connectes via an adaptec SCSI U3W controller.
When the Surestore is still on and I reboot the server, it stops at the bootprocess scanning the SCSI bus.
What is the problem or the mistake I make?
Could anybody help me?
Thanks a lot in advance.

best regards
thomas
 
Sort by date Sort by votes
Sounds like a basic SCSI termination problem or cable (bent pin)issue, have you resolved this problem yet? What kind of SCSI terminator are you using? Are there any other SCSI devices on the same SCSI bus?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sps Pros
  • Locked
  • Question
Replacing the EMC CX3 / CX4
Replies
0
Views
897
Sps Pros
Sps Pros
Sundaramoorthi
  • Locked
  • Question
Issue With "start /SYS" in the SUN Server T5120
Replies
0
Views
251
Sundaramoorthi
Sundaramoorthi
rightmirem
  • Locked
  • Question
Phy is bad on enclosure
Replies
0
Views
330
rightmirem
rightmirem
awsau
  • Locked
  • Question
SCv2020 initialization issue
Replies
0
Views
240
awsau
awsau
maybeimaleo
  • Locked
  • Question
Is There A Calculation For Number of SSD Disk Per FC Disks?
Replies
0
Views
66
maybeimaleo
maybeimaleo

Part and Inventory Search

Sponsor

Back
Top