Search results for query: *

I am using Microsoft RDP client. I have set to 256 colors, disabled mappings and toned down the "experience" tab to nothing. It should be customized for a 14.4 to 28.8kbps connection. I haven't found where Transparent tunneling was an option. Thanks.

Couple of things to check. Do you have multiple network cards/jacks in your computer? Is your cable giving you a link light on both the computer and linksys? Is it plugged into a switch port and not an uplink or WAN port? Uplinks will work as long as their tandum port, the first or last, is...

I have a VPN setup between 2 BEFVP41's. Both routers have static IP's, one with cable and one with pppoe DSL. My speeds are 1.5mbps-down/256mbps-up at the DSL site and 2.9mbps-down/404kbps-up. My dsl router is hosting 6 simultaneous vpn connections and the other 5 are working well. The BEFVP41...

Lady3Jane, I am using HSRP and that works well for outgoing traffic. Though I still need to test by unplugging primary ip's connection. The problem I am having though is testing to verify that the BGP network access properly fails over to the second ISP if the first ISP goes down. It didn't...

Here are the two configs I am using. Router One interface Ethernet3/0 ip address 51.46.68.2 255.255.255.0 secondary ip address 25.15.71.201 255.255.255.248 no ip route-cache no ip mroute-cache no keepalive full-duplex no cdp enable standby 1 ip 51.46.68.3 standby 1 priority 120...

Hello, If anyone is able to help with this, I really, really appreciate it. I have recently setup my first BGP connection. I have two ISP's, each connected to by it's own router. After setting it up, I wanted to test the failover ability. I did this by tracerouting to our BGP network to find...

Silnicpp, You have to keep in mind what information is in the ACL that you are working with. A standard ACL only has sources in it. So, in order not to block that source from going anywhere, you put it closest to the location you do want to keep it out of. If you were to put the ACL on the...

I don't have time to get a test print off. Less than 2 seconds. It appears in the print folder after being added, then disappears. Maybe it is a WIN98SE setting that if not found could be cured with reloading the OS over itself.???? The XP machine has no problems adding the printer then...

Thanks for any help you can provide. I am not sure what is happening here. I have two machines. One win2k, one win98SE. The win2k has a Lexmark x83 usb printer that I have shared. I have also added the user of the win98SE computer to the user list of the win2k computer. Both computers are in...