Search results for query: *

That would be great.. But I am using a router. Shouldn't I be able to use the 2 eth interfaces of the router ?

How would I set up 2 metro ethernet lines on a cisco 1841 router ?

I will be using VOIP and MPLS. What is the best access method to the MPLS Network ? Frame-relay or Point-to-pont T1 ? Thanks, Chris

Watchguard. If you want to spend hours troubleshooting use a pix.

I know... I have tried everything. I changed the ip of my router to 186. here is my updated conf. Thanks for your help. ip address outside 66.0.225.185 255.0.0.0 ip address inside 10.20.0.1 255.0.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400...

I changed the global to 186 and the outside ip address to 185. Still nothing. The NAT is working great though.

I corrected my global I misstyper 65 nstead of 66. Still nothing.

PIX 506 servers NATTING getting out everyting else is not. Please help ! The PDM will not work either. PIX Version 6.2(2) nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 h225 1720 fixup...

I have 2 isp's on the same router and the eth0 is connected to the firewall. Ho do I load balance or load share these 2 connections ?

Please help. I have 2 isp's and 2 routers, what is the best way to get his to work.

I would like to know the same thing. I was thinking about using either bgp or eigrp. It would be for internet traffic. Sorry if this is not exactly the same as the original post.

How do I get NTP to work on a 1720 router ?

How do I set the time and allow a 1720 to use NTP ? I used the same commands I use on the 2621. NTP clock-period 17180280 ntp server 192.43.244.18 I cannot get the 1720 to recognize these commands.

It could be all kinds of things. Make sure you are allowing ports 1494 and 1604 through the firewall or router. Also, make sure you do not check use firewall option in citrix connections and use the private addresses for the servers, not the public addresses. Besides that, you need to post more...

What does it mean when my switch is getting an unusual amount of receive errors on one interface ?

What does it mean when my lan is getting an unusual amount of receive errors on one interface on my switch ?

The problem is with you re-key time on the firebox. Make sure your settings are no re-key bytes and no re-key time. ot you could set time to 24 hours.

how do I isolate traffic to see 1 vlan ? What I want to do is add an office to only see the vlan it is on and not any of the other vlans, but be abke to see my default vlan.

I am using a great program called config-register decoder. Not sure where I got, but it tells what settings match confreg numbers.

Is it possible to run AAA / TACACS+ on Windows platform ?