PIX 506 NAT getting out everyting else is not

[cpace]

PIX 506 servers NATTING getting out everyting else is not.
Please help ! The PDM will not work either.
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
hostname pixfirewall
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list acl_out permit icmp any any echo-reply
access-list acl_out permit tcp any host 66.0.225.187 eq smtp
access-list acl_out permit udp any host 66.0.225.187 eq dnsix
access-list acl_out permit tcp any host 66.0.225.188 eq 1602
access-list acl_out permit tcp any any
pager lines 24
logging on
interface ethernet0 10baset
interface ethernet1 10baset
mtu outside 1500
mtu inside 1500
ip address outside 66.0.225.185 255.255.255.248
ip address inside 10.20.0.1 255.255.0.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 65.0.225.191 netmask 255.255.255.248
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 66.0.225.187 10.1.1.100 netmask 255.255.255.255 0 0
static (inside,outside) 66.0.225.188 10.1.1.47 netmask 255.255.255.255 0 0
static (inside,outside) 66.0.225.190 10.1.1.48 netmask 255.255.255.255 0 0
static (inside,outside) 66.0.225.189 10.1.1.51 netmask 255.255.255.255 0 0
access-group acl_out in interface outside
route outside 0.0.0.0 0.0.0.0 66.0.225.186 1
route inside 10.1.0.0 255.255.0.0 10.20.0.2 1
route inside 10.2.0.0 255.255.0.0 10.20.0.2 1
route inside 10.3.0.0 255.255.0.0 10.20.0.2 1
route inside 10.4.0.0 255.255.0.0 10.20.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http 10.1.2.18 255.255.255.255 inside
http 10.20.0.5 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet 10.1.0.0 255.255.0.0 inside
telnet timeout 20
ssh timeout 5
terminal width 80

 

[cpace]

I corrected my global I misstyper 65 nstead of 66. Still nothing.

 

[themut]

Hello there,

You cannot use that IP address on your global statement. It is your broadcast address. Use "global (outside) 1 interface" instead. Hope this helps.

 

[cpace]

I changed the global to 186 and the outside ip address to 185. Still nothing. The NAT is working great though.

 

[themut]

But according to your configuration 186 is your outside router. The default route is pointing to 186.

 

[cpace]

I know... I have tried everything. I changed the ip of my router to 186. here is my updated conf. Thanks for your help.

ip address outside 66.0.225.185 255.0.0.0
ip address inside 10.20.0.1 255.0.0.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 66.0.225.186
nat (inside) 1 10.1.0.0 255.255.0.0 0 0
static (inside,outside) 66.0.225.187 10.1.1.100 netmask 255.255.255.255 0 0
static (inside,outside) 66.0.225.188 10.1.1.47 netmask 255.255.255.255 0 0
static (inside,outside) 66.0.225.190 10.1.1.48 netmask 255.255.255.255 0 0
static (inside,outside) 66.0.225.189 10.1.1.51 netmask 255.255.255.255 0 0
access-group acl_out in interface outside
route outside 0.0.0.0 0.0.0.0 66.0.225.186 1
route inside 10.1.0.0 255.255.0.0 10.20.0.2 1
route inside 10.2.0.0 255.255.0.0 10.20.0.2 1
route inside 10.3.0.0 255.255.0.0 10.20.0.2 1
route inside 10.4.0.0 255.255.0.0 10.20.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 s
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.1.2.18 255.255.255.255 inside
http 10.20.0.5 255.255.255.255 inside
http 10.1.0.0 255.255.255.255 inside
http 10.20.0.0 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet 10.1.0.0 255.255.0.0 inside
telnet timeout 20
ssh timeout 5
terminal width 80
Cryptochecksum:623579d99475e9cff280582453e2bdd6
: end
[OK]