Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Andrew_G

    CS1000 CPPM read security dongle information

    Hello! I found reference that on a M1 with CPPII that when booting with a CDROM there's an option on the Tools menu to read the security dongle information (dongle engineering code, type, system serial, SDID). Is there a similar function on the CPPM (I'm running 7.5)? Are there any hidden...
  2. Andrew_G

    CSK1 Security and Signaling server on WMVARE

    Yes it works, it's unsupported by Avaya like most weird things. I'm using ESXi 6.7u3 on some Dell hardware, VM has 4 CPUs (RHEL 5 x64), 4GB RAM, 100GB HDD (set as IDE mode). Two network adapters (E1000 type), one on TLAN, one on ELAN. I used this ISO but it is backwards compatible with 7.5 CPPM...
  3. Andrew_G

    CS1000/MG1000 DS-30X and CE-MUX pinouts

    Hi all! Does anyone happen to have the pinouts for the DS-30X and CE-MUX connectors on the MG1000 chassis? Also helpful would be a pinout for the DB-25 connector cables between the main chassis and expansion, I believe these cables are part number NTDK95BB. Thanks, Andrew
  4. Andrew_G

    CS1000 Signalling Server running on VMware 6.7U2 - Success!

    To go along with my other tip, the CS1000 7.0 Signalling Server runs fine on modern VMware. I'm using VMware ESXi 6.7U2 on a Dell R510, storage is running off of iSCSI on FreeNAS. I've got two VMs, leader and follower using a VXworks CPPM Call Server. Network is a mix of random e-waste...
  5. Andrew_G

    CallPilot 201i SSD drive replacement success!

    So in case anyone is wondering you can replace the HDD in a 201i with an SSD. I've used an older Kingston SV300 120GB with a Startech IDE2SAT and it's working perfectly. I'm thinking any SSD should work as long as the BIOS recognizes it. I did a straight clone of the drive using a Windows PC and...
  6. Andrew_G

    CallPilot 201i Boot Failure "HOST"

    Well it seems that re-seating the BIOS chip allowed the card to boot again.
  7. Andrew_G

    CallPilot 201i Boot Failure "HOST"

    Hi! I have a CallPilot 201i with SCSI (no USB) and it is failing to boot. The front screen says "HOST" and there is no VGA output. I'm thinking it is bad RAM but was there anything else I could try to diagnose the failure? I've already ordered some RAM from the usual online auction site, so...
  8. Andrew_G

    CS1000 Rls 7.5 - Adding node removes signalling servers

    I've now managed to get a different error on the IP Phone Firmware page (I made sure that I configured the same applications as were deployed on the server, then checked the logs and it was failing to load the signalling server apps because I left ca.nortel.com in a box). No valid element types...
  9. Andrew_G

    CS1000 Rls 7.5 - Adding node removes signalling servers

    Hi All, I think I have everything set up correctly in UCM but when I attempt to add a node as soon as I save the settings the servers disappear from the Signalling Servers list. If I remove a server (or servers) from the node configuration they appear back in the Signalling Servers in...
  10. Andrew_G

    CS1000 Rls 7.5 - Element Manager not loading

    DNS is always a pain! My problem now is finding a CF that the CPPM will boot from so I can upgrade to 7.65. Do you know if I'll need new keycodes going from 7.5 to 7.65?
  11. Andrew_G

    CS1000 Rls 7.5 - Element Manager not loading

    Well that was dumb of me, it doesn't work in modern Chrome or Firefox. I re-enabled IPsec and then tried Internet Explorer (Windows 10 x64) and it loaded.
  12. Andrew_G

    CS1000 Rls 7.5 - Element Manager not loading

    Hi! In my lab I have a used CS1000 with CPPM running VxWorks Call Server Rls 7.5. The CS is all working correctly and with some help of a friend we reconfigured the cards, got inbound and outbound calling working via ISDN to a Cisco 2851, and analogue set dialing. :) So my problem is this, I...

Part and Inventory Search

Back
Top