Search results for query: *

Hi Thank you for reply. 1. Any mitel mivb maintenance commands to see if pri & sip trunk busy or free? 2. Can I pull SMDR reports from maintenance tab like last 200 lines or 100 lines?? If yes pls share maintenance commands. 3. Also any maintenance command to check logged in device? I will use...

Hi All We have couple of Mitel MiVB Rel 8 system which need to be shutdown, user have been migrated to teams & contact center user cloud vendor. Before shutdown Admin & IT team need to take logs or reports which show no trafic running on mitel mivb. We are new to Mitel MiVb with no mitel support...

Hi All, One of our client have mitel MiVB node around 20 in cluster plus one micollab server for voicemail. Recently on micollab alarms getting Major alarms (I/O problems detected). Kindly suggest what could be issue? Also can One login MSL Linux server via winscp?

Sorry guys the system is Mitel 3300 ver8.

Hi guys , We have 4-6 mitel 5320 phone which showed locked on display. Can get extension details by searching MAC of 5320 ip Phone. If yes what will be steps.

Hi All, A user needed to activated Call forwarding on office to mobile number. I have created a call forwarding profile , but still calls goes to it voicemails. What must be issue pls help guys. Also how to take incoming calls trace in mitel 3300.

Hi all, Need to configure one way broadcast in unify is 4000. I have given attribute to one digital phone & created access code with DAR = BROADCST. further nothing mentioned in feature usage documents. I mean there has to be some kind of group to be created which can be accessed by...

Hi guys, At os4000 system version 8.19 the analog handset euroset 2025C does not take time from system. Normally euroset 2025c take system time once I make a incoming calls to it. If connect same phone to ver7 system then it takes time from system. Any parameter to be checked. Any inputs are...

Hi guys, I am new-bee to Avaya and have couple of Avaya J1xx series phone. We have to test J1xx phone on 3rd party PBX system( mitel & Cisco). On power on I am getting access code on J129 & J179 server address. I have configured required setting in my PBX & few SIP phone are registor on this(...

Hi guys, We are using Unify Xpert V5 with 6010 hard turrets. We need to configure broadcast feature wherein one head IP turrets( Team Leader) user with one click can broadcast call to a group of traders & group member traders Speaker will get auto-on & Team Leader can give his message to all...

XML file was having issue. LAN IP address of Access point 500 was incorrect. Thanks for the replay.

hi guys, Have to reinstall the Access 500 with survibiality feature dues to continuous rebooting. But Access 500 is not getting SYNC with main OS4000 Ver7 & showing NPR status. Then run exec-ussu:confap,17; still softgate is down. Does some commands need to be entered at 4K end to initiate the...

Thanks for the reply guys...got the work done.

Hi guys, Does someone know what is directory where XML file is store in Os4000 V8 & Access 500? Does it is same for both the hardware? Need retrieve xml from system & reinstall the system.

Hello all, Need to integrate MOH device having 3.5 mm Audio outout with OS4000 Version 8 using SLMAV24 card. Does it is possible & how?

Need help with OS4000 system cards firmware/loadware How to identity which loadware running on peripheral Cards e.g.(SLMA24) & one download from unify portal are higher or lower. E.g. for SLMA24 i had transfered lastest Loadware under /LG80 folder via start/transfer option in Comwin &...

Hi guys need some basic help with regards to type of deployment in Os4000 I have deployed simplex & duplex os4000 Version 8 on eco server hardware. There is one more type separated duplex. It will be helpful if anyone share some document or information related to this & how it is diffent from...

First sbcsu thank you very much for your help. Finally figured it out TCD tables in OS4000. Configured TCD & RUFUM, its working. One more thing I need to define station PIN & feature code to block long distance call, by dialling *CODE+STN PIN user can now only dial internal extension number.

Thank you sbcsu & donb01 for the sharing info, configured speed dial in OS4000 , its working[thumbsup2].

Thanks sbcsu once again.[thumbsup2] I will config this & confirm back, mean time below are my observations correct me if I am wrong. ADD-LRNGZ:00,000,999; // created list 0 with with speed dial no as 000 to 999 ADD-ZRNGZ:0,001,9123456789100,0,"SIEMENS TEST NUMBER"; // mapping 001 of list 0...