I'll explain it ONCE MORE ...
On trunks that are both inbound and outbound ...
A line restriction filter applied to an analog loop start "trunk", say, 061, refers to OUTBOUND numbers you can and cannot dial when that circuit is used for an OUTGOING CALL.
A remote restriction on 061 refers to...
A remote package is a logical entity that specifies the outgoing line circuits that inbound ones can utilize to tandem through the BCM. The outgoing trunks are added to the package. The package is assigned to the incoming trunks.
In this case, you use a couple of stupid analog loop start...
I kinda worked for NT and this is copied straight out of the book ...
The OUTDIAL route determines which line or line pool the system uses when a subscriber uses:
- the Reply feature to reply to a message left by an external caller
- Off-premise Message Notification
- Outbound Transfer
The...
If he's the PBX admin, ultimately he's responsible.
A remote restriction would stop anyone who called in from dialing out a toll call. Let them dial out local when they are remoting in but block 0-, 011+, 411, 611, 911, 1+NPA, except 1-888 1-877 1-866 1-855 1-844. Centrex Link Transfers...
Thanks FirebirdScrambler. I gave you a star.
Yes, it can be done.
The 2004SIP.img file is the 0692D93c07 SIP firmware. The procedure is very similar to the one posted here with respect to upgrading Phase 0 i2004s except it would use a Solar Winds TFTP server.
I'll try it out and let you...
Sorry to say, but that hack was your fault.
You should have had a remote restriction in place that disallowed long distance calls when someone dialed in to the system.
That may be AT&T's opinion -- they are making it the future by force. Customers can choose to make AT&T the past.
SIP wasn't the only protocol on the table -- it's the COBOL of voip protocols -- overly verbose, and not well suited for Nortel phones which have always been stimulus based (IP or...
Yes, that is correct Firebird. Most people are unaware that i2004 (and possibly 2002 and 2001) Phase 2 sets can be manually converted to SIP by TFTP. I couldn't find an MCS 5100 forum here, and I couldn't find anything on Avaya's FTP site. God, I hate that company.
I found 0602B76 and...
I can say that, I used to work for them -- Brampton. The folks at Richardson were nice.
Things started to go sour when they became afraid of Crisco.
I spoke to the CEO of eMetroTel. Why are they using Asterisk? Did they not have access to the source code? Avaya doesn't care.
As usual, NT docs suck. Does a global analog station module in an expansion support rotary dial pulse (loop disconnect dialing)?
Global Analog Trunk Modules can outpulse to the CO in pulse, but can non-digitone analog stations dial in pulse mode they way they could on an Option 11 analog line...
I got a guy who says he has a Vantage 4. It has 4 CO RJ11 jacks, plus an emergency telephone jack when the power goes out, plus an amphenol RJ21 for the phones. I thought that was a Vantage 8.
So, of course 2 pairs go to each phone, but will a Vantage 8 (or 4) be able to use part of a Vantage...
So you're saying that I can have 0 Virtual Terminal seats and 4 FMFM seats and it will create Virtual Terminal DNs even though the virtual terminal seats were not purchased separately. Is that correct?
So my question then would be why the heck would your system have 256 in your .lic file?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.