Search results for query: *

Thank you Gwebster, we really spent time to check this on H.323 but no success. thanks for your reply

Hi, We converted our J189 from SIP to H.323 (6.8). looking at 4XXsetting file, to enable main screen saver on J189, there is clear text which says J189 H.323 phone and the resolution. For secondary screen its only mentioned as J189 SIP 4.0 . Question: Does this mean we will only be able to...

guys - it worked.. I did select Internal data,and had to do some modifications in incoming group and keep the same in user SIP Tab Thanks

Ip office is rls 10.1 . there are no dots in the originbating number..I have made it blank. the process for forwarding gives me complete DID number to oudial, this same number i have defined in User SIP. But when its twinned it just takes the extension number to dial out, and the call doesnt...

hi, anybody can advice what changes to be done.

Hi, Doesnt have any impact. Forwarding works fine... But when i do twinning the call initiates with extension number, how should i enable it to dial the whole DID number when the call is twinned?

hi, have attached the screen shot.. Also in SIP tab for user - SIP Name -- DID number and contact its the DID number.https://files.engineering.com/getfile.aspx?folder=e0468d57-3e2a-465e-bd04-6c32b63939dd&file=Capture.PNG

Hi, I have a SIP trunk ( PRI) from service provider. Call forwarding is working when i enter the DID number is User->sip TAB. Whereas the mobile twnining doesnt work. The DID number rings on the extension , but while the external call is going its shows only teh extension number in the host...

Hi, Thanks a ton!!

hi, @derfloh - do i need to do any change in the gateway to dial outside? you are right it seems it checks for user or huntgroup and dials back the users in the main node... thanks a ton guys.. will try this ...

Hi, Thanks Tim, but shouldn't it be odd, to dial the extension number even after dialing 9 as prefix? as after dialing 9 and external number it shouldnt again look for internal number..

Hi, I have 9901 to reach the gateway.. dial delay set for 4 tried increasing also. in gateway its ?/dial/./11( outgoing trunk)

Hi, Have Server edition Rls 11.1 with control Unit as gateway for PRI. have a short code 9N/dial/N/9901 works fine for all outgoing and incoming calls. Have internal extensions having series 1XX,2XX 3XX, 6XX hunt groups also. If I dial out 9 and 3XX and wait for sometime, it dials the internal...

Hi, Can we use auth codes to be dialed from B179? I have configured one B179, with force auth code, but still I can dial outside even if I don't use the auth code.. rgds

Hi Jose thanks for the reply. Hve already made a H.323 trunk between the two. I have given codes to dial at each end I also hve same extension at either location , so i use the prefix code to reach the sites. My issue is I dont get caller name on Panasonic phones and user only gets extension...

Dear, I have recently come across a integration document with Panasonic , where the document defines a OWN PBX code. This is well defined in Panasonic IP systems, but to integrate with Avaya IP office, they have defined OWN PBX code of Avaya IP office by naking a SC as follows: Code: 10N...

Hi, Has anyone deployed IP 7000 with NCp 1000? i am able to register the phone as SIP endpoint, but not able to make 3 party conference.. the button to add /join the conference doesnt seem to work. neither call waiting is allowed on the device.. kindly advice rgds

HI, You are right, i have a requirement to connect more than 6 sites, so having just one number prefix will make matters worse. so i have "XX" two numbers as prefix now so atleast get an option of having connection to more sites. and reserve the rest of the starting digit numbers.. thanks

Hi, @intrigrant.. I wanted to use Option One. But then again as you said if i use a code suppose "1" then i cant have extension to my system to start with the same number.. I wanted some ways where we can do this as my series is 3 digit, some way if i can induce delay and make the system...

Hi, @intigrant -- i did propose it before, there was change in plans and i was lost with the prefix. and i kept the 3 digit as extensions @westi -- do i keep the 3 digit extension or should i make it 4 digit. by default delay count is 4. so will it work? 22XX 23XX 21XX from Avaya to Panasonic...