Search results for query: *

to get to internet, site A RTR2 has to go extra hop via Site C RTR 1, then to Site A RTR2 and off to internet. RTR1 in site A only has to hit RTR1 in site B then off to internet. Since all the routers behind site A RTR1 & RTR 2 are taking the router via RTR1 due to shortest path, Last night i...

Diagram is just showing 3 sites connecting. We have several sites. Look at the attached link, picture towards the end on the right side. several customers, CPE connect to a few cisco UBR1000 routers, who then connect to Cisco GSR's at their respected site, example site A & Site C. Cisco...

Hi, We have the following setup, all OC48 links: Site A RTR1 ---- Site B RTR1 ---- Level 3 Site A RTR2 ---- Site C RTR1 ---- Site A RTR2 ---- Level 3 Currently, link between Site A RTR1 to Site B RTR1 is saturated. Site A RTR2 to Site C RTR1 does not have much traffic on it. Would...

Here is the situation. - Site-to-Site VPN is setup from company A to company B - Company A needs to setup Site-to-Site VPN to Company C as well. - Company B & C will not have access to each other. - Equipment used, Cisco 1710 (2 interfaces). Internal interface on Cisco is 192.168.2.***...

you have to setup NAT or PAT. june03

Alot of companies use NAT. See the link below to help u get started. http://www.cisco.com/warp/public/110/19.html june03

thank u, it worked. june03

subnet mask are all 255.255.255.0 for both networks. I have switches on both sides, but there arent setup to do anything. june03

*PIX = 10.0.1.254(inside interface) & a static route to 192.168.1.0 network via 10.0.1.250 *2nd PC = 10.0.1.1 & gateway is 10.0.1.254. I added a static route to 192.168.1.0 network via 10.0.1.250 *Router = 10.0.1.250(outside Interface) & 192.168.1.254(inside Interface) *1st PC = 192.168.1.1...

thank you for your advice. I will be purchasing a used router via ebay. june03

My home lab consist of the following: cisco 827--------Pix 501---------Catalyst 2900 I was looking at the following routers: cisco 2611 w/ 1 T1 card cisco 2621 w/ 1 T1 card What i want my setup to be is: cisco 827--------Pix 501---------cisco 2600-------Catalyst 2900 I want to be able to...

My home lab consist of the following: cisco 827--------Pix 501---------Catalyst 2900 I was looking at the following routers: cisco 2611 w/ 1 T1 card cisco 2621 w/ 1 T1 card What i want my setup to be is: cisco 827--------Pix 501---------cisco 2600-------Catalyst 2900 I want to be able to...

I've tried it only behind the router, i get connected, but cant access or ping anything. Thank u for your help. I'll keep working at it and when i find a solution i will let u know. thank u again... june03

Hi, im trying to configure a cisco 827 without nat, however i can only ping from the router to the internet, i cannot access the internet from my pc. Do i need to setup a access-list? if so apply to which interface? thanks june03

It's my router. I have a Cisco 827 router as well as a Pix. Do i still need help from my ISP? I know VPN works with my Netgear rt311. thanks june03

Thanks for your respond. I tried to disble Nat on my router, but all i'm able to do is ping from the router to any host on the internet, however, im not able to access the internet from my pc, but i can ping the router, but not get pass that. Do i have to setup an access-list to allow internet...

Im having problems connecting my host pc into my corp network using vpn. Here's my setup PC-----PIX-----ROUTER---------INTERNET-------CORP NETWORK's VPN CONCENTRATOR 3000 im using the vpn client v 3.0 at my end to connect to my corp network. Im also behind a pix firewall and a cisco router...