Hello,
i've used the MOV command in LD25 to move a XCOT/PPM universal trunk card from one loop to another.
Req > mov
Cust
SRCL 12
DRCL 20
SHCD 0 10 TO 0 6
This worked
I tried it again and it didn't
Req > mov
Cust
SRCL 00
DRCL 20
SHCD 1 2 TO 0 8
Didn't work
I would simply line...
I have a M3904 with the green intercom button displaying active call but the indicator displays an outline ∧ of a phone not the normal solid indicator.
What state the phone is in ?
is it possible to have an ACDN that will route to an announcement that was created on the callpilot ?
Example,
In coming call > AA answers > callers chooses option 1 > call is routed to an extension > i want to transfer this call to an announcement that is option 4 on the main menu > i press...
Hello,
Does anyone know the pinout for an (MRV) RJ45 to amphemol pinout ? or RJ45 to Port 0 pinout ?
what have,
RJ45 > DB9 > mini gender changer DB9 > mini adapter DB9-DB25 > Null modem > Port 0 on (NTAK19ECE6) to amphenol. Connects to CS1000 (CS, SS, MCG)
I want to go from MRV RJ45 to...
Pair 5 is correct, I have PWR to the console on 5. DO you think AUX power can be the solution?
Does anyone know what is the TN voltage required to power the console ?
I have an M2250 console connected about 1500ft from the MDF and it works. When i try connecting a PC console it doesn't power on.
Any ideas on how to get the PC console working ?
Also how to i pull back a transferred call using the M2250 console?
Thanks
i understand, it would have been cool if it was as simple as just disabling the call waiting queue. Since we never have more than five calls at a time.
Hello,
How to get incoming calls on a nortel PC attendant console to roll up to the next loop key ?
Below is a brief description of what happens to an incoming call.
1. Console is idle 1st call comes in, loop key 0 indicates the incoming call the indicator flashes green.
2. Second call comes...
I would like to fully restrict extensions from making outgoing calls but outgoing calls can only be made by inputting a code. How can this be done ?
so no code internal calls only(fully restricted)
code to make external calls(unrestricted)
how does DID work when you are simply recieving the last 4 digits from the provider ?
No idc table, no conversion is done.
I have an extension 5556, i can dial 722 from my cell phone and the extension will ring directly.
I made a new extension 5510 but if i dial 722 and the extension number...
hey guys,
i have a PC attendant console interface unit. When i plug in the DB-25 mulitpair connector at the back, the led indecator at the front of the unit keeps blinking from green to red. The power fail line is set to off position.The programming of the console is fine if i plug in the 2250...
hello everyone,
System is a CS1000,how would i go about finding the DID (direct inward dialing) number associated with a particular extension number lets just say 5577 is the extension number. That calls an OPX line at a remote site. The DID number provided by the service provider is 961-4921...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.